Question about n20 with my compounds

chevota84

chevota84

New member
Joined
Jul 6, 2009
Messages
4,926
My bottom turbo is a 475 83/74 with a 1.10 housing, do you guys think the drive pressure will be okay spraying 070 jets with a progressive controller? I'm trying to decide if I should gate around both turbos or just the top and dump it back in at the hot pipe. I'm pretty new to nitrous in general so any other info is helpful as well.

Sent from my DROID RAZR HD using Xparent Blue Tapatalk 2
 
top turbo would be?
injectors would be?
pump would be?


if you don't want to get into that stuff... well Fu-- yeah! spray that baby! let us know what it does.
 
Top is a 57/65/14, injectors are 7x.014's and its a VP truck.

Sent from my DROID RAZR HD using Xparent Blue Tapatalk 2
 
Current overall boost, primary boost, and overall drive pressure?
 
With everything turned up I'll see 95psi with 100-105 psi drive, primary boost is 35 psi.

Sent from my DROID RAZR HD using Xparent Blue Tapatalk 2
 
You will be fine to just gate around the secondary, you should start gating more around it currently.

Load that primary up and make it work.
 
I was actually thinking I was pushing the primary too hard and was considering going to a 1.25 housing to slow it down a bit. I'm putting a helix 2 in this spring as well, so that's probably going to change my gate tuning some anyway.

Sent from my DROID RAZR HD using Xparent Blue Tapatalk 2
 
You must log in or register to reply here.
Back
Top