Issue #1 Door gaskets and such need to be done. Ive already dicked around with new strikers and adjustments. Wind comes in at the latch and at the top corner. Should I look at anything else other than gaskets?
Issue #2 steering box adjustment. No hole in the frame. Best you just take the box off or is there a trick? I can't get it right enough on the frame there's too much slop for my liking. I try doing it the way TRW recommends (take drag link off and apply 10 ft lbs to pitman arm by hand and eliminate slop) but I just cant tighten it enough.
I bet there's more than a few tricks you guys know of for this stuff.
Issue #2 steering box adjustment. No hole in the frame. Best you just take the box off or is there a trick? I can't get it right enough on the frame there's too much slop for my liking. I try doing it the way TRW recommends (take drag link off and apply 10 ft lbs to pitman arm by hand and eliminate slop) but I just cant tighten it enough.
I bet there's more than a few tricks you guys know of for this stuff.