2wd Super Mod build

I like the looks of the low sitting trucks. If you raise it any just do it about an inch just for a little more ground clearance. Other than that, leave it alone lol
 
That is what I was thinking to Because I can Move it around with the body up some so it don't drag and get on a scale.don't it look big useing a full size truck.

Dale
 
We got the rear wheel wells cut last night and the bed sides mocked up orderd the tubing for the fram for the body this morning.
01-28-09_1925.jpg

01-28-09_1923.jpg

The tubo's that will be used just one I'v had laying around
HT4C and a 42 Garret
01-28-09_1926.jpg

01-28-09_1927.jpg

Dale
 
isn't it a little short for a 2 wheel puller, I watch NTPA and they tend to look alot longer than that. maybe it is just cause the all seem to chop the tops for that lowrider look
 
The are useing the midsize bodies and my hood is 6" longer than a 2007 truck the bed is 80" it just looks short because of cab is so big. All the trucks are the same lenght 15' ft from the center of the rear axle to the front of the frame you are alow 10" of fiberglass casmedicks like a bumper as long it is fiberglass and molded to the body.

Dale
 
2wpuller said:
The are useing the midsize bodies and my hood is 6" longer than a 2007 truck the bed is 80" it just looks short because of cab is so big. All the trucks are the same lenght 15' ft from the center of the rear axle to the front of the frame you are alow 10" of fiberglass casmedicks like a bumper as long it is fiberglass and molded to the body.

Dale
Click to expand...

I think you just made up a new word...LOL
 
A couple more picture from last night.I talked to the grafics place yesterday about having the body wrapped and he mentioned that he is willing to spnsor most of it.We will see what he comes up with he say's it will be wild.Can't wait to see the art work.
01-29-09_2005.jpg

01-29-09_2004.jpg

01-29-09_2002.jpg

01-29-09_2006.jpg
 
Looks good Dale. So what kind of paint job are you gonna go with, or are you going to go with one of those wild multi graphics vinyl wraps?
 
Thats sweet I was looking at the pics thinking it looked short also. Then again color black makes things look smaller.
 
I think once we get it roled out side and have it close to another truck it will look normal.Maybe
Dale
 
2wpuller said:
I think once we get it roled out side and have it close to another truck it will look normal.Maybe
Dale
Click to expand...
Looking good Dale! The garage is fairly deep, I think the angle of the picture is slightly misleading- look how long the front fender appears. It's about 2' longer than my ride. ;)
 
The front axle is moved forward alot we cut 6" out of the front bumper for tire clearance and the fender well is alot smaller than stock.I can't wait to see it outside.We are makeing the frame work today and have alot of the pipe cut and bent going to hit it hard sunday.by the midle of the week should be able to tilt the body.

Dale
 
You must log in or register to reply here.
Back
Top