My P24V build

4b01cdcb8c64a5c199e88efdace9d0b0.png


Stainless Diesel manifold, with some nice stainless steel studs and nuts holding it to the head. Makes installation a breeze.


Sent from my iPhone using Tapatalk
 
4441ed3ec9f8a30580dbd41aeba7397a.png

Valair quiet ceramic dual, really regret not just swapping the auto in now, but it's on its way.


Sent from my iPhone using Tapatalk
 
cd602ca92af7c23e0a781e3717ec633b.png


I can't stress enough how much loath having a handshaker in this truck. Even more so that it's an nv4500...


Sent from my iPhone using Tapatalk
 
9a6f3103b85d6442ca23e7a833ffb721.png


Redneck engineered coolant bypass using a watts 530C pressure relief valve, ED billet freeze plug, ED thermostat spacer, and some AN lined and fittings.

And some braided covers for the heater core lines since I wasn't to enthusiastic about having rubber coolant lines so close to the manifold. Yeah, it looks goofy kinda... well, a lot, but until I come up with a better solution, they'll work.

Upon further research, I found that the 50PSI opening pressure, while better than nothing, is not as good as I can get it. I have since located one that has a 25psi opening pressure that will be better suited for this task.

And yeah, I cut the lines a little long, but I fully intend to cut a few more inches off of everything.


Sent from my iPhone using Tapatalk
 
Last edited:
9a898601ea35ed2ca4906d694934c483.png
4f8298ac8fec2ba066fa513ea32e5a38.png


Compounds finished.

Wasn't too thrilled about how the powder coating turned out either, was supposed to be a nice polished aluminum finish, but came out a crummy gray color. Luckily, the shop was cool about it and even they said that it didn't come out right. But, since I was pressed for time at this point, I had no choice but to accept it, and they only charged me for material for the trouble.


Sent from my iPhone using Tapatalk
 
780c7f10152cc691e2c8e72070660f4b.png


BD intercooler mounted up. A little pricey compared to others, but fitment was perfect, so I don't mind paying extra for the convenience of ease of installation. I've heard HORROR stories about the ON3 intercoolers, so I'm glad I spent the extra money.


Sent from my iPhone using Tapatalk
 
e3807e44c33dc2c0f7848551b3080b1f.png


Out with the analog, in with the digital. Hey, I'm not THAT into mechanical!!


Sent from my iPhone using Tapatalk
 
cc129fb3187e91b300b43668b8d58cc4.png


And this is where I'm at now. Yeah, I know I'm going to catch hell for the purple, and that's ok lol.

To get y'all completely up to speed...

The 62/475 has grown boring, so I'm preparing for a bigger setup. Somewhere around a 64/482 or 64/484 setup, and ditch the 7x0.012s for some of Weston's 6x0.018s. And an auto swap of course. Bottom line, I want to be competitive in the 10.90 index, AND milk this 180 for all it's worth. If I can get this truck down to 5,000lbs race weight, and be in the 850-900 neighborhood, I think I might be able to pull it off.




Sent from my iPhone using Tapatalk
 
Awesome build! Thanks for sharing. Excited to continue to see how it turns out!

Sent from my LG-H900 using Tapatalk
 
d47d44a3a9b2ca9e7ce7b7b7bb5c4692.png


Stage 3 180 from Seth. Really regret not going with the 7mm, but i already had the 024s from my 12V, and I doubt the extra 10cc would have made THAT big of a difference.


Sent from my iPhone using Tapatalk



I wanted to note that I DO have a plate, just had to provide my own since the pump I sent to Seth didn't have one.


Sent from my iPhone using Tapatalk
 
7463c06f5aa3a156694a307cd9028983.png


Diesel World Finals last year in Ennis TX. 4 hour round trip seemed suitable for a maiden voyage. Not a single hiccup, minus some parking lot AFC adjustments along the way.

I can't get over how sharp this little pickup is, for a 2nd gen anyways. Not bad for 17 year old paint.
7c4151f5209ec477f3eef16c5d81e12b.png



Sent from my iPhone using Tapatalk
 
That's a sharp looking truck!!! Definitely on my to-do list someday to build a shorty 2wd play truck with a 12v of course, but I can't hate, at least you have a proper injection pump in that rig!!!
 
Back
Top