12v + 24v Injectors

24v

New 7x.012" Sac $650 or $600 with cores.

New 7x.010" Sac $600 or $650 with cores.

New 7x.012" VCO $500 or $450 with cores.

Used 6x.013" Sac with cut crossover tubes $400 with cores

Will sell cut crossover tubes for $100 plus cores

12v

Used 215 5x.010" vco. $150 or $100 with cores

New 1st Gen 4x.015" Sac $350 with cores
 
7x10 and 7x12 24v sac are gone but can get more if needed.

24v

New 7x.012" VCO $450 or $400 with cores.

Used 6x.013" Sac with cut crossover tubes $400 with cores

Will sell cut crossover tubes for $100 plus cores

12v

Used 215 5x.010" vco. $150 or $100 with cores

New 1st Gen 4x.015" Sac $350 with cores
 
New to the cummins world with a 94 cummins in a 1985 chevy silver ado. What power gains can I see going to your 215 injectors? Thanks kevin
 
24v

New 7x.012" VCO $400

Used 6x.013" Sac with cut crossover tubes $375 with cores

Will sell cut crossover tubes for $100 plus cores

12v

New 1st Gen 4x.015" Sac $325 with cores


Pic of a cut crossover tube

395106_328835350480245_728780107_n.jpg
 
shortbusdriver said:
I dont see results from the tubes. I make them for injectors with a wider pattern, or to run additional timing (with the thin washer). Once I send them out I never hear from them again.

These have the edge filters removed.
Click to expand...

How much does the thin washer correct for spray angle?
 
You must log in or register to reply here.
Back
Top