Exhaust Manufold studs

06 DIESEL

06 DIESEL

Dead Eye Firearms LLC
Joined
Sep 17, 2007
Messages
5,134
Set of 12 exhaust manifold studs with nuts. Ordered a large quantity to get better pricing on a set that I needed, now liquidating the remaining 7 sets. Grade 12.9 (~174,000 PSI) the picture with the stud in the motor is fully seated. They are 50 MM overall. Set of 12 nuts and studs, $20 shipped. I only accept paypal or cash in person. Text 443 two five zero 8691 for fastest response.

It is hard for me to get to the post office during the week, so if you buy a set, expect that the earliest it will be mailed out is on Saturday via USPS priority mail.

10986426_10203801312209503_4185078507425668124_n.jpg


22283_10203801312089500_3182340531696013218_n.jpg


11048632_10203801312249504_2015860645525046303_n.jpg
 
Are you guys running without spacers? I'm just curious if you ever have backing off nut issues?

I've always run spacers, but I may just be wasting money and adding weight!
 
I ran another set on my 06 with compounds and only had one back off, due to install error, in 40,000 miles. No other issues with them. I do not run spacers.
 
Will these only work for 12 valves, are common rail sizes different
 
To the best of my knowledge they will work on all Cummins.
 
Still have a few sets left, and a few that have texted or PM'd that I have not received money from yet. Remember, a text is best and fastest to get in touch with me, but I am trying to be fair to first come first respond, FYI.
 
Work on all exhaust manifolds for a 12v? How many threads stick past the nuts when manifold is bolted on?
 
I do not know on all, the picture shows the stud bottomed out and still has just over an inch of thread sticking out. If I get time tonight I will bolt my steed speed to my 6.7 and take a picture of them and post them, if I still have any sets left. For reference a steed speed is 17 MM of flange.
 
All are spoken for pending payments and Steed pictures. Will update tonight.
 
All are SOLD and paid for as of last night.

Pictures of studs bottomed out in 6.7 head with steed speed manifold attached.

attachment.php


attachment.php


I have had several people ask if I can get more for the same price, I would have to check, I think I can, if there is enough interest. I have to buy a minimum of 8 sets at a time for the price that I sold these at. As of now I have two guys wanting more sets, you guys have to let me know if you feel it is worth me getting more or not, I have no issues passing a good deal along to you guys, but I do not want to step on any toes, nor is it feasible to become a supporting vendor to sell a few sets of exhaust manifold studs.
 

Attachments

  • 20150406_194324.jpg
    20150406_194324.jpg
    43.3 KB · Views: 0
  • 20150406_194343.jpg
    20150406_194343.jpg
    37.3 KB · Views: 0
Last edited:
06 DIESEL said:
I ran another set on my 06 with compounds and only had one back off, due to install error, in 40,000 miles. No other issues with them. I do not run spacers.
Click to expand...

Thanks for the info. I might head that route next time I'm playing in that area. They definitely look clean installed.
 
Travis, I'd take a set if you can get more at that price.

Thanks
-Will
 
Looks like I have a confirmed 5 more sets if I make the order, maybe more depending on CumminsPOWER and his order quantity. If I get 7 confirmed I will take the gamble on the 8th and order them, speak now, I am only going to make one more order.
 
You must log in or register to reply here.
Back
Top