6.4L Cummins Build Complete and awesome.

QMFB said:
I'm in the middle of my 6.4 build right now. Bought a buffer last week to polish up some stuff. Never considered polishing the rail and lines... But I am now ! Looks good man.
Click to expand...

Thanks buddy. And make sure you post pics of your build.
 
870c7268efec360f1a91d7626c823d0a.jpg


Getting closer. One baby step at a time.


Sent from my iPhone using Tapatalk
 
Dom_c13b said:
are you drilling and taping the stock sprag race or are you using the AA bolt in race?
Click to expand...

Drilling and tapping the stock sprag. Only using the template from the A&A kit, and actually my buddy knocked out the inserts and got one smaller one and one for the tap which is pictured. I’m using a #3 bit and tapping the threads to 1/4-28 using 1” UHL ARP bolts to bolt it in. Tapping case and sprag. Not drilling threw the sprag either. I left about .100 material from going threw.
 
I ended up hardening the stock sprag so much I couldn't get more than a dent in it.
I just ordered a kit from.... somewhere in canada? name escapes me.
 
Dom_c13b said:
gotcha, I've consider doing it that way too. You using a carbide drill and tap? Or just going real slow?
Click to expand...

I used cutting oil, a smaller cobalt bit (for hardened steel) to drill a pilot hole, Then followed threw with the #3 bit that came with the 1/4-28 tap. I attempted it with a HSS bit first which took forever. Using the cobalt bit first cut time in half.
 
Last edited:
Cummins 2831325. I looked at running this but decided it wouldn't clear the ford firewall

Sent from my XT1575 using Tapatalk
 
ecd9a79b1fe1ffd41a1b251298a06b4a.jpg

Tig welded my planetaries for the trans. Transmission is about ready to go in. Me and my trans builder have been very busy. But it’s coming along.


Sent from my iPhone using Tapatalk
 
6afad811ab7c9cbfeaf9cb4c0a627f95.jpg

4965482fdc2fb035c6ae4e06f57fa27a.jpg

9cc89dd675fae77ba5c97289f9a2d32a.jpg

Custom made feed line Exergy made me off a template I made them to make a PPE dual fuel kit work with an H&S dual feed kit.


Sent from my iPhone using Tapatalk
 
c0a4dd73a7c682ddded4c70393ca47ee.jpg

513815ce9a05abce66e95f049995bb8c.jpg

ba10c150ae1e6bc3324dacbcb52d081c.jpg

6.7 intake horn with custom made bracket for the dipstick and ppe coolant pipe I cut off the PPE coolant reroute pipe and tig welded on. As well as the Turbosmart raceport I tig welded to it.


Sent from my iPhone using Tapatalk
 
1370ac0db925f5be777fd07ac9ab43f3.jpg

f1ad015bc75608dff21b01cab664ddc4.jpg

7b50fc6915324c58ac08a540e9c6758c.jpg

e7a29351896d593b1cc1829a638a00da.jpg

Fiberglass bedsides, and bigger digger paddles I picked up from my buddy Ric. Carbon fiber SRT hood I picked up yesterday from my buddy Gabe which was Ric’s, and Woosleys before that. And I got my TCI transmission line pressure gauge installed.



Sent from my iPhone using Tapatalk
 
Last edited:
You must log in or register to reply here.
Back
Top