madmikeismad
So mad
Last 2 days my raptor 150 has been dropping pressure, and then won't turn on when I turn cycle the power. But if I tap on it it will turn back on like the motor was seized or something. Does this mean the motor is going bad?
My airdog will prime up when I turn the switch on and then cut off. I can bump the starter and it will start running also, I believe this is normal operation because the ECM is commanding it on.
Have you by chance pulled the cover off of it and seen if there was any trash in the rotor and stuff
sounds like the pump is going bad. try taking it apart and checking the motor with a meter, read the resistance across the winding's.
Last 2 days my raptor 150 has been dropping pressure, and then won't turn on when I turn cycle the power. But if I tap on it it will turn back on like the motor was seized or something. Does this mean the motor is going bad?
I should add that tapping it not only makes it work again, but returns to full pressure.
Sent from my DROID RAZR using Tapatalk
It's not blowing the fuse? On my last road trip my airdog kept getting trash in the rotor, and stopping me dead in the middle of the highway. I had to put a stupid inline filter before the pump to keep it from locking up.
Sent from phone