Anyone recognize this intake bolt pattern?

ComnRailPwr

ComnRailPwr

New member
Joined
Jun 15, 2009
Messages
3,293
Anyone know who's bolt pattern this is on my CR head. It came on that orange filled 6.7 I bought off here a little over a year ago. Their is 26 holes and they are all symmetrical. 2.375" between the holes side/side. 2.250 between holes top/bottom. .375 from bottom of head to center hole .375 from top machine channel to bolt center. It had a home made leaky ass intake and want to check on buying one before I build one.
48d2a34e1a50a871d136e12584dd2a08.jpg
1fc7b42ef4b9410ce0bac9aadff3d226.jpg
27aa7f4ff5e29f12668ff99fb5f62492.jpg
 
None of the ones I see online has common bolt spacing that close together. Might be making your own..what fuel system are you running? You could make an adapter plate if you don't have a fuel rail to worry about lining up.
 
Thats what I'm gathering as well. I'm CR so I have a fuel rail to di€k with. I'll probably end up making my own.
 
Maybe a Hellmann? Or zzfab? Wouldn’t hurt to ask either of them
 
Yes it is and their is twice as many holes as their needs to be. I'll come up with something
 
OK, idiot question: Why in the world would someone do that instead of adapting to the OEM intake bolt pattern?
 
TheBac said:
OK, idiot question: Why in the world would someone do that instead of adapting to the OEM intake bolt pattern?
Click to expand...
Their is no such thing as an oem intake bolt pattern. Cummins intakes are casted into the head
 
You must log in or register to reply here.
Back
Top