What do you want to do? Add a switch just like people add a lockup switch?
If so, just tap the OD solenoid wire, hook it up to a switch and run the other side of the switch to ground. I added one to my truck several years ago when I was trying to diagnose a tranny problem.
What if we cut the wire and ran it into a three position switch so that it could be locked out, normal, and manually commanded on?
What if we cut the wire and ran it into a three position switch so that it could be locked out, normal, and manually commanded on?
I talked to Dave Goerend last week about my trans and how to control it (47rh), this is the way he recommended.
3 position switch.
middle position, no lockup no O.D.
up position, Lockup no O.D.
down position, lockup and O.D.
One switch to do all.
How to wire, not sure. I'm not that far along in the swap.
What if we cut the wire and ran it into a three position switch so that it could be locked out, normal, and manually commanded on?