Recent content by tinkertoy

2nd gen t3 ATS 425.00 been ported by machine shop 3rd gen Steed speed with gate t4 600.00 If u want pics I can text them!

I’m tossing the idea around or going common rail and using a keating gear housing! But the ones that have done it or know how about going about it what do u use for a 2nd gen truck? Main concern is ac bracket! And like to use 2nd gen alternator.

Who’s ran one and who builds them?

I’ve dealt with this for a year and first checked Alternator with a machine to see if it had ac noise and guy said it was ok on truck! Said it was ok so I put 4 tps’s last one was complete unit never could get the timbo’s set right! Also put 2 ecm’s and a injection pump with a wiring harness...

I've figured out how to make exhaust brake work with BD's valet switch three-way valve and wastegate but got too thinking about putting a 10k Dail to control Watergate movement! Anyone got any ideals?

Supposedly this stuff is new and never ran just used as a mock up that I bought of a guys! I thought it was cast stuff and after I drove to meet and payed him I found out it was steal. I put cam in my engine just to measure and took back out it does still have a gear on it but I got take it...

Needing the gear housing for 01.

I put senser on billet cover that I been working on for awhile and I advanced the pump 1 tooth which should be 5*! And ain’t got a Communication to ecm to pump so I got it fooling the ecm. The problem I’m having is it don’t start good, I put a new hotrod pump on and thought it was bad but I put...

I’m thinking of changing my setup to compounds and looking at dps triples and called about them and they tried to talk me into twins said they would have better spool and more power! Help me understand how a S480 will turn better than 2 S362’s?

I’m thinking of putting some insurance on my axles and not sure what to go with on my daily for the street class! It’s a 01 dodge with 32 spline up front, I am hoping to be in the 600-700hp range and got a Detroit locker in the rear that we made work with 355 gears. I think Haisleys up front my...

Has anyone put a hx35 with 12v exhaust housing on a 3rd gen manifold?

I got my old pump rebuilt from industrial that they don’t make anymore! I will sell to ppump if not I’ll run it till I get ready. 2250.00

I’ve got a ported 2nd gen manifold and looking for a 3rd gen.

I’m going back ppump and was going try and use the adrenaline for data logging and I like the tst monitor because u can see it good and it’s digital! I figured the adrenaline would work even if I had to hook a psg to my harness. The tst just needs 12 volts to box on pump wire to make it work I’m...

I was running a Schied diesel street cam in my 01 24v a had problems eating lobes off so I switched back to a late 12v stock cam! And last time I had it out I noticed number 6 lobe was warned some, so I switched oils to a racing oil for more zinc to see if that helped with heavier valve springs...