Search results

Hey guys, What are the best sleeves when building a 6.7 deck plate engine, and where is everyone getting them from? With the deck height being an inch taller are the sleeves longer as well? Thank you

Those of you running full hydro steering and an electric hydro pump, are you still plumbing the electric pump into the factory brake booster the same way it would if you were still using the factory power steering pump? This is on a 97 dodge Thank you

Looking into putting electric over hydraulic steering on my 3.0 truck I’m building. Which size Ram are you guys using? This is on a dodge second gen. 2.5” bore by 8” stroke? Also if you could point me in the right direction for a good orbital valve and a electric pump that isn’t overly...

Looking for a front engine mount for a 5.9 engine. Pm me with what you have. Thanks

Looking for a already made hood stack pipe for a second gen dodge, for an hx60. The flange on my 60 is 5”

This is for the guys who are running coil over shocks inside the factory springs on a second gen dodge. What length and model of shock are you guys running? Just wondering how much stroke I should look at and spring rate. I know spring rate will be pendant on how much weight I’m hanging...

I have a 230-240 cam and tappets. I bought and never used it, good shape and ready to go. Buyer pays shipping. $500 obo

I just wanted to comment and say thank you for this site and to a lot of the people on it. Building a 3.0 truck has been a new adventure for me and the people on this site are extremely friendly and helpful, I’ve asked a million questions looking for help and advice and you all do the best you...

Any one have a manual hub conversion kit for a dodge Dana 60? Must be 35 spline stub shafts. Doesn’t have to be the ems brand, trying to save a little coin over buying brand new. Thanks

What diameter/wall thickness are you guys using for drive shafts on a 3.0 truck? Drop box and rear is set up for 1610 joints and the front is set up for 1480 joints. I want to build it right the first time so I can eliminate broken parts as much as possible. Thanks for your help

I have a question for those of you who have ran a drop box behind an nv4500. How much of an angle to the driver side of the truck are you putting the drop box? This will be in a 97 12 valve dodge, Extended cab long bed. Waiting for my box to show up then I want to start getting it...

Looking for a trex girdle or girdle without the studs. I already have 14mm studs. Was hoping for a trex girdle but he is behind and not sure when he can get more made so I’m looking for good used in the mean time. For a 12v Cummins engine

Looking for a 2wd tail housing for dodge Cummins nv4500 Thanks

Does anyone know the part number for a spl100 yoke for a rockwell/meritor rear 20145 axle? Thank you in advance

Looking for a good used profab drop box. No one inch gear boxes, it’s going in a 3.0 limited pro Cummins. Please just private message me Thanks for your time

I’m building a dedicated puller still trying to decide if I wanna play in the 2.5 class for a couple seasons first or jump right into 2.6. My question is about crank machine work, do I need to have my crank machined for added bearing clearance on a high rpm engine or can I get away with the...

Long story short I ended up with a 68rfe 5 Star converter. It came from the Diesel bros and hasn’t been ran before but has been sitting in their shop with some other transmissions and trans Parts for a few years. I’ve talked to ats and verified a few things. It is a 5 Star standard stall...

I’m sure this has been best to death all ready but seems like these 2.5 trucks are really getting up there in Hp numbers. Who’s the go to for a competitive 2.5 charger?

Hey guys recently purchased a ats trans, was told the trans was a stage 5 and turns out that it is not. Ats told me I would just have to replace the shafts the get it to hold what I need it to hold which is around the 900-1000 hp mark. So can the average mechanically inclines guy take...

im in the market for a HTT 62/71/13 ss, dont quite have the cash for a new one yet so if anyone has a low mile used one they wanna part with let me know. thanks