Search results

Looking for a gated 65mm exhaust housing. Let me know what you have.

Due to packaging reasons, it would be extremely easy to run a gate on only the front 3 cyl of the manifold. I don't see this as an issue, but if there is one, I still can put it in the collector and gate both runners, it would be alot more work of course. Gate is. 44mm jgs and top turbine...

Just picked up a s369sxe from a fellow members and will be using it as my primary in a set of small compounds on my 02. The secondary will be a s256 with a 65mm turbine wheel and .85 housing, it will be wastegated with a 40mm jgs gate into the hot pipe. The s369 has the 73mm turbine wheel. It...

Pulled out of my freinds wrecked 97 12v. Was running and shifting just fine. It's an all stock trans with a goerend rebuilt overdrive section. You can use it as is on a stock truck or as a good core. Valve body was loosened to drain fluid for storage and it has no filter installed. Fluid was...

Looking for a cooling fan for a 91.5 to 02, shipped to 94590. Will buy with clutch and shroud if you have them.

Anyone know what the torque spec should be for a k31's compressor nut? I looked high and low and couldn't find diddly.

I have a new hx40 16cm wastegated turbine housing, t3 flange and comes with the wastegate actuator. Asking 150 plus shipping. I'll put up some pics in a bit, been sitting on a shelf for about 5 years but never run.

Well, im finally sick of my column shifter after hitting neutral one too many times. I've actually got a hurst quarter stick and a B&M pro ratchet in my possession but have never used either because the only auto i have is my truck. Any opinions on either? the B&M looks to be better quality.

Is there a PCM reflash available to get rid of this p1740 trans code? I have a pretty tight 89% dtt billet super single and it pops that code about once every 2 weeks. I don't drive my truck hard all the time so thats probably why the computer thinks there is not enough drop in rpm's when it...

Not sure if its been posted before.... but Diesel Grand National Diesel Grand National

Anyone think that this Help ID a weird BW turbo? - Competition Diesel.Com - Bringing The BEST Together k31 will make a good primary under a 62/68? I just want to make sure the turbine will flow enough on it.

Looking for a 4.10 and down power-lok case for my 02. im sick of one wheel peels in 2wd.

I thought all 64mm/76mm s300 turbine wheels were 11 blade, 71mm wheels had 10 blades. The s300 on my 02 has a 10 blade 64mm wheel on it and the htbg that i also have has a 11 blade 64mm wheel.... is there any benefit for either?

I'm looking for ideas on cleaning up low boost/cruising smoke on my 02. This thing is almost undrivable on the street due to the smoke, you can see the smoke rolling out of the tail pipe just cruising around at low boost 5-10 psi. i have no idle haze and the smoke cleans up past 25-30 psi...

I need a pic of how the coolant pipes are done with a 3 pc exhaust manifold, specifically a pdi manifold. I dont have the install kit nor instuctions and i just want to see what modifications need to be done to the pipes.

I ripped my 47re out to do a billet input, dtt super single converter, billet accumulator and apply pistons, apply lever, valve body, and a red lined solid band, and noticed that my stock clutches and steels were like new. Is there any problem running dexron 3 with them? I know lots of people...

I got this turbo from a 2004 series 60 DDC that was used as a demo engine for detroit diesel... was never run on the street. Detroits part number is 23515635, its got a 72mm inducer, 102mm exducer comp wheel and a 96mm inducer and 88mm exducer on the turbine wheel. The turbine housing is a 1.34...

Guy tells me its a pius built turbo, i think its a phatshaft 64.... specs are 64/65/14. Any ideas?

Well, man, you knew this was coming. I pm'ed you for the past few days and i know you got my pm's because you have been online a couple times daily everyday. I bought a set of injectors from you, we agreed on the price of 260 shipped on them. You also told me that they are 150hp Scheid...

looking for a s300 wastegated turbine housing for a 65 wheel, let me know what you have.