Search results

OK, so, I know a lot of us are already aware that the aftermarket ratings of injectors are not very representative of what's actually being injected in terms of real world use. I learned this fact some years ago, and it has bothered me ever since to see people tossing around flow ratings in the...

OK, guys. I have an II Thunder S330 (62/74/14) turbo for the 04.5 - 07 Dodge Ram Cummins trucks up for sale. It was built back in August of 2010, and has approx. 25,000 miles on the turbo. It was the "top turbo" of a compound setup and has never had any issues. My only reason for selling it...

So, from what research I have done and what I've seen from systems that measure boost pressure from the stock MAP sensor (Edge Juice W/Attitude, for example), the factory MAP sensor is a 4 bar sensor, meaning it will read from vacuum up to 43 psi. What I am curious to know is the Voltage vs...

Hey guys. Most pertinent mods done to my truck are in my sig. Here's the issue I'm having. After putting the fresh motor in the truck, I set the valve lash to .010 (I), and .020 (E). After about 1800 miles, I started to notice a slight pop noise coming from the exhaust. It ALMOST sounds like a...

Ok, I hope to spark up an interesting conversation here, and get some good insight from members of the forum that have been down this road, and actually have some factual information (be it derived by personal experience, or by laws of physics). The topic of conversation is, as stated in the...

Ok, so I have an '05 that I just finished building the motor on. While doing the build (Industrial Injection did machine work/assembly), II suggested an electric water pump to avoid the possibility of blowing freeze plugs (I'll be running a 4k rpm tune). I was a little concerned about the...

Ok, some of you may have seen my earlier thread, Miss at idle Blow-by from valve cover!. So, in light of the fact that I need to freshen up/rebuild my bottom end, I have decided to take it to the next level. I am fairly new to the Diesel scene, but have an in-depth understanding of engine...

Ok, guys! I've been lurking on this site for a short while, just trying to gather knowledge about diesels. I'm fairly new to diesel engines, but VERY well versed in gas engines. What are some common causes for a miss at idle, and blow-by coming from the tube that runs from the valve cover to...