seriousdiesel
New member
Im in the process of building an 04 cummins and we are shooting for a goal of over 1000hp on a single with fuel only. Ive got a few calls in to places but
I thought Id post up and get everyones opinion on what to use, and see if anyone else has succeeded in accomplishing this yet. The engine will be balanced, 12v england rods polished and shot peened. Bored .020 with QSB 480 pistons with valve reliefs. maxspool springs, and a custom cam from Greg. A Banks intake manifold, some rough head porting by me and then honed at extrude hone. Injectors are 63 LPM from JL and the pumps will soon be a pair of stage 2s from Floor it. Smarty and a Painless pressure box will be used for electronics. Any suggestions on a single turbo that will be able to acomplish 1000hp, some limited driving on the street, and pulling?
Nathan
I thought Id post up and get everyones opinion on what to use, and see if anyone else has succeeded in accomplishing this yet. The engine will be balanced, 12v england rods polished and shot peened. Bored .020 with QSB 480 pistons with valve reliefs. maxspool springs, and a custom cam from Greg. A Banks intake manifold, some rough head porting by me and then honed at extrude hone. Injectors are 63 LPM from JL and the pumps will soon be a pair of stage 2s from Floor it. Smarty and a Painless pressure box will be used for electronics. Any suggestions on a single turbo that will be able to acomplish 1000hp, some limited driving on the street, and pulling?
Nathan
Last edited: