Tate
What?
- Joined
- Nov 5, 2007
- Messages
- 3,419
There is a timing light kit you can buy that clamps to the injector line, but some opinions say they are not too accurate. Plus you would need a balancer with timing marks and make a timing tab to go by.
My light generally is about one or two degrees less than what the lift chart says. A bit greater disparity at higher timing, simply because most timing charts are just extrapolated at 0.1mm lift equaling 0.5 degrees.
No need for a balancer with timing marks. A decent light with the advance function and a line for TDC on the balancer is all you need.