Hi I have a 96 12v Cummins was running fine was driving at about 30 mph made a pop noise then all of a sudden lost power an started blowing white smoke I have a adjustable timming gear that’s keyed iv checked the timming just to be sure it set right which it’s at 25* has new industrial 5x22 injectors im getting fuel at the injectors when I crack the lines some an I have 50 psi reading on my fuel gauge getting hard to start an blow a lot of white smoke at idle an wont rev at all without popping also running rough doesn’t has a fade fuel system on it. Could the ofv be causing these issue any ideas an things to look for would be great
Last edited: