TruckYou
New member
Finally finishing up the engine for my race truck... Once my runner intake shows up. Curious if someone can help me out with an estimate Max degrees if injection timing to keep the pattern in the bowl
Stock stroke
Large bowl 12v mahle pistons
Machine shop took .006 off the deck, and head
155* 5x25
With a .020 FR HG
13mm pump w/.093 lines
Looking for a starting point on where to time the pump, and a rough idea of Max timing before wiping out the rings
Sent from my Moto Z (2) using Tapatalk
Stock stroke
Large bowl 12v mahle pistons
Machine shop took .006 off the deck, and head
155* 5x25
With a .020 FR HG
13mm pump w/.093 lines
Looking for a starting point on where to time the pump, and a rough idea of Max timing before wiping out the rings
Sent from my Moto Z (2) using Tapatalk