powerchoke-eatr
RACING!
- Joined
- Jul 20, 2007
- Messages
- 330
Well, dont really wanna sell but thought I'd see if i got any bites on her! Started life as a non intercooled, VE, 5speed Getrag 4wd. Got a 1996 P-Pump with 150,xxx miles, KDP done as well. 47RH gone thru with shift kit, billet servos, strut and lever. All the following parts are less than 6 months old maybe 5000 miles.... intercooled grill, headlights with HID, marker lights, tail lights, fender lights, external voltage reg, AC compressor, dryer, expansion block, reman steering gearbox, valve cover gaskets, front and rear main seals, side cover gasket, all filters and serpentine belt, hoses, pump has been gone thru by Shiver Diesel with 5000 RPM springs, injectors, hx-40 turbo with full 4in down pipe, starter, engine and trans mounts, transfer case, rear driveshaft and u-joints, suncoast triple disc converter and billet flexplate, trans cooler with hoses and fittings, brakes, master cylinder, transfer case light switch, rear speed sensor, new trans linkage bushings, 20x12 KMC wheels and spline drive lug nuts, door hinge pins and bushings, window seals and blades/scrapers, vinyl floor pulled out and sound proofing, insulation and new carpet put down, headliner, tint, pioneer cd mp3 with bluetooth and mic, JBL door speakers, amp wire kit all ran under carpet, white face gauges, LED dash lights, isspro tach, exterior paint. now for the used...intercooler, intercooled core support and radiator, 05 dodge ram seats with console, tires are 34'' nitto terra grapplers with 40% tread, automatic steering column and brake pedal, made my own u-joint style steering shaft, K and N filter in stock housing. Last few weeks i drove it I averaged between 20.45 and 20.75 MPG, truck runs and drives great, AC and heater work as well. only thing needs to be done is front drive shaft made and hole cut in floor for 4wd shifter. All interior has been dyed black to match black seats and headliner as well. Im sure theres more, if I think I'll post it up and try and get some pics put up as well. Looking to get around $9500.
