Kustum_kid
New member
Never really thought I would sell this thing but, times change and I would like to see someone use it. Here you can buy a pulling truck that you dont need to trailer to the pulls, just drive it like I do! The truck started life as a 2003 F-350 Super Duty, cab and chassis with 90,000 miles on it (aprox 2000 miles on the build). It was a 2wd truck from florida. I did the 2006 front end conversion to it using all new parts, and HID/led lighting. The wheelbase is very long (176" to be exact). If you look close you will see the reese class 5 hitch mount is only about 6" from the rear tire! I chopped the frame down to put the 8' flatbed on it. In the front is a high pinion dana 60 with 35 spline axles and a yukon air zip locker, transfer case is a ford 271 with a dodge input shaft and a new chain, rear is a dana 80 with 37 spline shafts, rebuilt with a new eaton posi unit. All suspension is new, procomp leafs 4" lift, rancho 9000 adjustable shocks, adjustabe HD track arm ect... truck does not bounce when pulling. Custom articulating ladder bar (so it don't bind when street driving), suspension stops in the rear, custom pulling hitch ect... 35" BFG's on ultra wheels with 2" spacers in the rear. Bed is a Martin custom aluminum 8x8 flatbed with all led lighting. 80 gallon tank/toolbox on the bed with a 3 gallon sump on the frame (to ensure no fuel starvation under hard acceleration). Motor: (short block done by UCF) 12v block .040 over, 6.7 crank, 12v rods, ARP studs, custom mahle 24v pistons, industrial injection race head, fire ringed, (race port job on intake side when shelf was removed), stainless joker side draft intake, custom lightweight beehive springs with tool steel retainers, custom camshaft, manton 7/16 push rods, jd adjustable pump gear and billet front cover, maxed 215 pump done by Seth Farrell, CPP conversion lines, Weston 7x12 injectors, DTT assassin pump with custom bypass, custom stainless header coated inside and out, Barder billet 366 turbo with .81 gated T4 housing, huge 4" thick custom intercooler, 47re trans suncoast billet input and ouput shafts, billet drum, DPC converter, suncoast valvebody ect... I used a hyd pump out of a F600 for the steering and it turns the big tires with one finger! Truck has a 1997 dodge harness and computer. It works just like original, down to the tow haul button on the ford shifter for OD off. Custom full digital dash, snow 2 stage 3 nozzle meth system. I'm sure that I have missed some things but you get the idea I was trying to build the baddest mechanical street/pulling truck possible and have it be reliable. That it is, I would drive it cross country. The main issue I have with it is its not great for towing with the current injectors...they are a bit much. The same injector made 900 rwhp on a 24v that still had a shelf on the head... so, they are plenty for sure...lol. Inside it has custom bucket seats, infinity sound system and cd/nav. It is a plain truck so roll up windows and manual locks. These trucks loaded will not make weight (8000lb around here for pulling), This one is 7800 and thats only because I chose light weight parts and it is a plain truck. The price is not obo... I don't care if it sells. It has never been on a dyno, it moves very well for a 8000lb truck. I have seld pulled it in street classes and won or placed second most of the time with much less fueling than it has now as I was taking it easy on the new motor! I have many pictures for anyone seriously interested. - Dustin 717-439-7543
$26,000
$26,000