24 Valve block, head, crank, pushrods and connector tubes

[hydroshok]

I disassembled a motor that developed a knock. One of the pistons was galled and a tappet broke. I can't find much other damage save for light scoring in that cylinder and copper showing on some bearings. It is probably able to be honed. $200 OBO on the block. Buyer arranges shipping.

The head had a stripped rocker bolt from the PO, but I Heli-Coiled it. It doesn't effect the operation. The bore on that rocker is enlarged and the threads ground off part of the stud so it still gets lubrication. I'd Like to get $300 OBO out of it. Buyer arranges shipping. Located in Nashville, TN. There is some surface rust from sitting, but it looks good otherwise.

Crank looks good. $100 OBO, buyer arranges shipping.

I'll have a perfect head out of my other truck in bit. If you are interested in it let me know and I'll try to get it pulled. I'm converting both trucks back to 12Vs so that's why I'm selling. If you need a piston, rod or something else small; let me know. I don't have cams or tappets, but I do have the stock pushrods. I also have a bunch of odds and ends so PM if you need something.

Connector tubes, $50 shipped in the lower 48.

 

[DieselheaD]

So where is the 6th connector tube?

 

[hydroshok]

Good one. I didn't even notice it wasn't there. I just grabbed them out of the bolt jar to snap a pic. I'm sure it is there if you are interested.

 

[hydroshok]

 

[hydroshok]

Lines and valve cover are gone. Everything else is still up for grabs. make me an offer, it is in the way...

 

[hydroshok]

So where is the 6th connector tube?

You're slipping, I forgot the intake rocker on #5 too. Crank is sold BTW...

 

[hydroshok]

Bump... make me an offer, this stuff is in my way.

 

[hydroshok]

Weekend bump, crank back up for sale. C'mon guys I need this stuff gone, make me an offer...

 

[Newtodagame]

Rods?

 

[hydroshok]

I have someone interested in them. I'll let you know if it falls through.

Edit: Rods sold. Sorry.

 

[hydroshok]

Sold connector tubes, but have one more set. $50 shipped.

Also sold rockers and bridges. Bare head with injector hold down bolts and plates $200 OBO

I also took apart the pistons when I sold the rods. Five good ones and one scored one. $20 each plus the ride or $100 shipped in the lower 48. OBO of course, they need to go! Wrist pins look fine and are included.

 

[hydroshok]

Block sold. Need the rest of the stuff out of the way. Make me an offer...