2nd gen parts, VP44s, 24 valve ecms and more.

Mark Nixon

Mark Nixon

No Savior among the flesh
Joined
Feb 26, 2009
Messages
8,677
Good running SO VP44s, have 4 or 5, $500 each SHIPPED.

Running 1998-2002 ECMs, have several part numbers and trans type, $375 apiece SHIPPED.

Vacuum pump/power steering combos, later style, with hydro assist brakes, $175 SHIPPED.

Block adapter plate, fits auto OR manual, $135 SHIPPED.

Fan hub assembly, with pulley, $125 SHIPPED.

Fan assembly, with clutch, from a 2001, $175 SHIPPED.

NV4500 bell(s) with fork(s) $315 apiece, SHIPPED.

HX35W, 1998-2002 24 valve, nice, tight running unit, $300 SHIPPED.

Factory OEM breather "bottle" vent assembly, vent, hose and bottle, $25 SHIPPED.

Slate gray 5 speed console for 1998-2002 2WD (has cupholder assembly), includes upper and lower boots, all in very good condition, $150 SHIPPED.

COMPLETE 2001 Dana 80 DUALLY with disc brakes, 3.54 gears with a locking differential, 110,000 miles, nice and tight unit, $1000.

1998 SRW Dana 80 with 3.54 gears, seems tight and it's full of oil, $400.


HEADING TO TEXAS EARLIER NEXT WEEK AND I CAN DRAG STUFF ALONG!!!

Reply, PM, Call or Text 402-780-5127.
 
1 VP pump has SOLD!
Added a few pics.
The manifold, in the 1 pic of the turbo, is an HTT 3-piece 24 valve manifold, I'll take $275 SHIPPED for it.

Mark.
 

Attachments

  • 1486942986176-1664703664.jpg
    1486942986176-1664703664.jpg
    192 KB · Views: 0
  • 1486943023112753219979.jpg
    1486943023112753219979.jpg
    215.8 KB · Views: 0
  • 1486943132133-1949587381.jpg
    1486943132133-1949587381.jpg
    202.1 KB · Views: 0
  • 14869431619581833932865.jpg
    14869431619581833932865.jpg
    233.2 KB · Views: 0
  • 1486943253260-1789578917.jpg
    1486943253260-1789578917.jpg
    203.6 KB · Views: 0
Last edited:
Pretty much everything on the list above is still available.

I only have 2 SO VP44s left, $500 apiece.
1 is missing the key, but the number (044) is clearly marked on the pump.

Also picked up a couple more 24 valve ECMs.

Mark.
 
I have 4 VP44s available that are runners, 3 SOs and 1 HO, $500 apiece.
I will knock a significant amount off the price if you have a good, undamaged core.

I have the following ECMs for 24 valve:

1998 5 speed, part # 3942336, $350.

2000 5 speed, part # 3946242, $350.

2001 5 speed, part # 3947412, $350.

I also have the following odds and ends pieces:

VP44 injectors, 2 sets, $80 a set SHIPPED.

Transfer tubes, 2 sets, $65 a set SHIPPED.

OEM 24 valve fan w/clutch, $175 SHIPPED.

Early rocker arms with pressed on tips, $100 SHIPPED.

Injector lines, somewhat tarnished and dirty looking, $100 SHIPPED.

Complete 1998-2000 non-53 shortblock, no oil pan, was a very good runner, $450.

Fuel bowl from a 1998 24 valve, $45 SHIPPED.

Fan hub, with pulley and ALL bolts, $100 SHIPPED.


Mark.
 
Picked up a good working 2002 5 speed ecm, part number 3947912, $350.

Mark.
 
Just picked up a 2001 245 horse VP engine that needs rebuilt.
Has 150k on it and was "sanded".
Going to part it out as follows:

VP-44 injection pump, 6 speed HO, was a reman, $500.

ECM, 6 speed, worked good when removed, part number 3947412, $350.

Injectors, $80 SHIPPED.

Cylinder head AS-IS $100 PLUS FREIGHT.

Rocker arms, USA with plastic retainers, $100 SHIPPED.

Transfer tubes, $65 SHIPPED.

Connecting rods, unknown country (not that it matters), $125 SHIPPED.

Crankshaft, needs at least a polish, if not cut .010-.010, $250.

Dent free oil pan with tube (if needed) $125 SHIPPED.
 
Still have a 2001 5spd ecm? And do you take good ecms on trade? Have a 2001 auto ecm that has been flashed to 2001 6spd h.o.
 
I do have a 5 speed one, but the connector bolt is broken off, so it would have to be dug out.

I would think that the ecm you have would be fine with a 5 speed?

Mark.
 
With the cruise being electronic, the light on the dash stays on and wont engage. Also has no load percentage reading.
 
You must log in or register to reply here.
Back
Top