DieselWrencher
6cyl Vette
- Joined
- Dec 4, 2006
- Messages
- 2,886
I'm selling off some extra stuff I'm not going to be using now due to switching projects. I will get pictures uploaded tonight. I will get a shipping quote, just give me a zip code. All prices are OBO
3rd gen power heated tow mirrors $175
5.9 CR Exhaust Manifold $50
Complete 04.5 5.9 head removed from a running engine, no known problems $350
Reconditioned 05 5.9 Complete Loaded Head- has been crack checked, new valve job, plain-ed, ready to go $1000
05 5.9 Short Block- Block has had fresh hone still standard bore and deck surfaced. This block has a cam bearing in the front journal, and the rear, nice 12v crankshaft, recon CR rods, 05 pistons, complete with gear train, gear housing and front cover, cam gear, CP3 gear, rear seal plate, pick tube, and oil pan. Oil pan is a rear sump pan, but is not a dodge app pan. It also comes with a dodge style adapter plate, has a good dampener with tone ring. It just needs new gaskets, rings and bearings. $2000
5.9 CR Valve Train- Rockers, pedestals, push tubes, 12 bridges and hardware, injector hold down hardware as well $250
05 5.9 CR Set of 6 Injectors- Have been tested and all pass, but the nozzles are bad due to the PO setting the head on a bench with the injectors still in the head. $500
05 5.9 Fuel Rail with Lines $250
07 5.9 Manual Trans ECM $400
07 5.9 Engine Harness (Both front and rear harnesses) $250
I might be able to meet some where to help out with shipping on the bigger stuff. Call Ryan at 515-250-5121. Thanks.
3rd gen power heated tow mirrors $175
5.9 CR Exhaust Manifold $50
Complete 04.5 5.9 head removed from a running engine, no known problems $350
Reconditioned 05 5.9 Complete Loaded Head- has been crack checked, new valve job, plain-ed, ready to go $1000
05 5.9 Short Block- Block has had fresh hone still standard bore and deck surfaced. This block has a cam bearing in the front journal, and the rear, nice 12v crankshaft, recon CR rods, 05 pistons, complete with gear train, gear housing and front cover, cam gear, CP3 gear, rear seal plate, pick tube, and oil pan. Oil pan is a rear sump pan, but is not a dodge app pan. It also comes with a dodge style adapter plate, has a good dampener with tone ring. It just needs new gaskets, rings and bearings. $2000
5.9 CR Valve Train- Rockers, pedestals, push tubes, 12 bridges and hardware, injector hold down hardware as well $250
05 5.9 CR Set of 6 Injectors- Have been tested and all pass, but the nozzles are bad due to the PO setting the head on a bench with the injectors still in the head. $500
05 5.9 Fuel Rail with Lines $250
07 5.9 Manual Trans ECM $400
07 5.9 Engine Harness (Both front and rear harnesses) $250
I might be able to meet some where to help out with shipping on the bigger stuff. Call Ryan at 515-250-5121. Thanks.
Last edited: