47re swap in a 2012, harness ?

[Mopar1973]

Standard procedure is to use the search function, which has not yielded any results as far as what I'm after. Normally I know most people flash auto trucks to manual and bypass the clutch safety switch and then run choice of TCM or MVB. My local dealer is having a hard time sourcing the correct harness. Has anyone ever jumped the existing 68rfe auto harness for a 47re swap with success? Any insight is appreciated.

 

[biggy238]

Why a 47? It's being done with a 48 from what I know of it.

Sent from my XT1575 using Tapatalk

 

[Poulina]

47 is way easier to wire into the truck since there is no tv motor

 

[Borrell07]

Contact Firepunk. I had their 68 info box in my 2012 with a 48re swap. The box tells the truck it is in neutral (which allows 4low to engage) except when the 47/48 is in reverse. You can use either 47 or 48, it just needs a 47 neutral saftey switch. Also your tuner has to eliminate all of the 68rfe stuff from your tune. Hardway is who I use for tuning.