Cowboy303
New member
- Joined
- Nov 11, 2013
- Messages
- 57
Got this in a bundle of crap and don't need it. Figured one of y'all fine gentlemen could. Both sides measure slightly under 5", and will slide on a 5" tube/compressor inlet after enough beers and choice words. I have no idea what it's off of, but figure it would be pretty slick in keeping the air filter in the stock location on a larger single turbo system.
I don't know what the dumb thing is worth, what I do know is I need a 5" 45° Intake Elbow, and this isn't that. So if you have one you wanna trade, great. Otherwise they're $30+ shippings so we'll start there.
As seen, it could use a little cleaning on the inside, and is slightly pitted from whatever aluminum doodad it being clamped to corroding.
I don't know what the dumb thing is worth, what I do know is I need a 5" 45° Intake Elbow, and this isn't that. So if you have one you wanna trade, great. Otherwise they're $30+ shippings so we'll start there.
As seen, it could use a little cleaning on the inside, and is slightly pitted from whatever aluminum doodad it being clamped to corroding.