blackmega3500
New member
So between Firepunks kaboom, and PDD...... the question is who's next?!
That's what I'm talking about!! :Cheer:
I'm still slackjawwed looking at those pics. Incredible.
We should have a YouTube video up within an hour or so!!!
As far as setup:
Solid Hamilton 6.7 Block
4.250" Diamond Pistons Centered Bowl
Carrillo HD standard length rods
6.7 Cummins Crank
Filled/Ported Hamilton WarHead w/ Inconel Valves 2" intake
Farrell 16mm P7100 pump (1350 cc capable)
PDD 5x038" IH-style dual feed injectors
62mm 220/240 4.50 lift Flat Tappet Cam
9/16" Pushrods
14mm Gorilla Girdle
14mm by 9/16" Custom Length Head Studs
PDD Custom Timing Case w/cam support bearing
Custom 8.3 Oil Pump
SMT Roller Rocker Assembly (This pass had SMT, have also successfully used Harland Sharp for all of UCC)
Pair 98mm GTX5533 chargers feeding a large custom Bell water/air cooler then feeding an 88mm GTX55 on the T-6 steed manifold which then feeds a second Bell water/air cooler and then into a Keating intake manifold.
Scheid Electric water injection system
Backed up by a PDD 48re Rollerized/Transbrake/Dump Valve/Lockup DPC Quad Disk
6100 LB race weight.
On this pass we started fueling at 370 cc's and ramped up to 960 cc's over the course of 2 seconds so it didn't really make big power till 3rd gear.
Nice post Raychem......
Can't remember last time I swiped up so much.....
Usually left or right!
Looks like the block wasn’t the problem
Cummins Race Engine Explodes into a Ball of Flames | Power Driven Diesel - YouTube
Sent from my iPhone using Tapatalk
Well it's good to see his datalogger wasn't impacted.
And being the first to spin to 8k!
8,260 RPM? Did I see that right? Is that the most a cummins has ever turned?
Looks like the block wasn’t the problem
Cummins Race Engine Explodes into a Ball of Flames | Power Driven Diesel - YouTube
Sent from my iPhone using Tapatalk