So i have a 6.7 fully built with a 5.9 head amd 250 inj. I am working with gecovey for my tuning but wanna play around myself with the tune while i wait for new tunes from gecovey.
So the i am running now has max duration of 2050 dont know timing or anything else. It seems anything over 25-30% load it is crazy smokey and snuffs out the turbo.
My thoughts are take a tntr5 base map, drop the duration way down and drop timing down a ton and go from there.
Any suggestions. When should i start needing to use the timing calc, wot part of tune or work on duration then start dropping timing for spool.
Truck is running a 75 single and motor was built to be a comp motor on spray.
Thx
So the i am running now has max duration of 2050 dont know timing or anything else. It seems anything over 25-30% load it is crazy smokey and snuffs out the turbo.
My thoughts are take a tntr5 base map, drop the duration way down and drop timing down a ton and go from there.
Any suggestions. When should i start needing to use the timing calc, wot part of tune or work on duration then start dropping timing for spool.
Truck is running a 75 single and motor was built to be a comp motor on spray.
Thx