6.7 Longblock cores

I have a couple of '06-'07 5,9 heads with no damage.
$450 each.

Mark.
 
Yes, I have one here that appears to only need a simple hone and re-assemble.
I also have another that needs bored.
Both were 2006 engines.

Mark.
 
$850.
Call me at 402-780-5127 if you're interested.

Mark.
 
Last edited:
Still a lot of decent blocks, cranks and heads here, but I'm about ready to kick some of the rougher stuff out into the iron pile.
After I run it by the Plasma Cutter. :evil

Mark.
 
I am in the final stages of rehab-ing a very, very lightly burned 2007 6.7, as I type.

It'll have good lines, rail, valve cover, turbo, CP3, everything external will have been replaced that NEEDED it.
It has delete parts already installed on the manifold and air horn.

I may even get around to test running it.

$3800.
 
Sold the engine above. :)

Looks like I'll be over in Central Ohio sometime this week. :cool:
I maybe can drag an engine along.

Mark.
 
Still have plenty of nice 6.7 parts here.
And some not-so-nice ones, too.

Mark.
 
Still have some very decent pieces, here!

I can now ship blocks, heads and cranks through an LTL account.
Average SHIPPING COSTS for a longblock is ~$350, heads are ~$175 and shortblocks are ~$250, though the prices may vary somewhat.
Shipping is higher to residential addresses, so terminal pick up would be recommended on the receiving end, to help keep cost down.

Mark.
 
Playing with prices a little, based on condition.

6.7 Blocks needing bored, $700 each.

6.7 Blocks with decent cylinders, should be okay honed "loose", $900.

6.7 cranks needing cut, $250.

6.7 cranks that "should" polish, $700.

6.7 cylinder heads with seat/deck damage, $275.

6.7 cylinder heads with shelf cracks (burns), $325.

6.7 cylinder heads, no shelf, valve, or deck damage, $400.

All prices PLUS FREIGHT, or come pick-up.
 
Looks like I'm going to Arizona/California within the next several weeks, to a month.
I can drag along what your little heart desires. :)

Mark.
 
I have the lightly burned one out of that 2011 5500.
Otherwise I have enough to given you a block, crank and head, plus any other internal components you might need.

Mark.
 
Do you have a 6.7 block that’s decent minus the deck? Lol


Sent from my iPhone using Tapatalk Pro
 
I always recommend a surface job on all of them.
I don't have any that have no deck, though. :lolly:

Mark.
 
Back
Top