94 reg cab short bed 4x4 build

Shortbedguy

New member
Joined
Apr 24, 2012
Messages
255
x3env6.jpg


348rn13.jpg


2n1zyur.jpg


1zdr70w.jpg


1994 dodge ram I bought it in idaho With a bad transmission.i should get the transmission from the shop tomorrow
 
According to my memory, the 2nd gend frame rail was made of 2 sections, but according to picture it looks like 3 sections


edit: sorry I am stupid, I have work with 2nd gen frame rear section last few days, and never noticed the riveted rear part.
 
Last edited:
I centerd all my holes and transferd them 16 inches forward and used a frame drill and drilled all the holes and then separated the two halfs cut 16 out and slid the two back together and bolted and a little welding. Is this how you did yours?
 
I centerd all my holes and transferd them 16 inches forward and used a frame drill and drilled all the holes and then separated the two halfs cut 16 out and slid the two back together and bolted and a little welding. Is this how you did yours?

Yeah that's how I did it. it's more work but it looks better it looks stock
 
2012-05-24_10-35-20_694.jpg

2012-05-24_11-12-03_933.jpg

2012-05-25_09-43-12_892.jpg

2012-05-25_10-33-11_455.jpg


Back to work I traded transmissions work for a shortbed coversion now I have to pay up
 
Back
Top