96 short block low miles, pump, turbo, ect

[TURBOLVR]

I have an extra 96 short block from a ford dump truck. Broke an ear off the head or it would be a long block. Has only 67k miles. Prefer local pick up. bores look great, still with lots of cross hatching. $700.obo.

Have the 847 Ppump from the same engine. Great cond. tamper screws all intact. $500. obo.

Side mount air compressor and hydo pump, complete assembly, bracket, cooling line, oil feed/drain, special tin timing cover, ect. $500.obo have 2 of these.

Have 2 allison bell adapters and flexplates with mounting ears. $200. obo each.

3 P7100 drive gears $100. ea.

2 sets of stock injectors $100. obo ea.

Have 2 front sump/PU pans with drain ports in the side. $150. obo ea.

ford high mount fan assembly w/fan $100.

motorcraft (ford) alternator (high mount) and whole side bracket assembly with down facing water outlet. $150.

stock 12v fuel pump mech. $50.

stock filter w/s assembly $50.

Industrial style 12v rear down exit manifold in good shape. $100.

WH1C turbo in good shape $250.

HX35 turbo in good cond. only 30k miles! $300.

harmonic damper and pulley $100.

3 sets of valve covers (6pc) no tin covers $50. set.

 

[Drothgeb]

I'm looking for a core pump to upgrade to 13mm. Do you know which cam and governer that 847 pump has?

 

[TURBOLVR]

auto gov, no idea on the cam.

 

[TURBOLVR]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps1a008522.jpg.html"]photo_zps1a008522.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zpsabe5532e.jpg.html"]photo_zpsabe5532e.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zpse1a79a1e.jpg.html"]photo_zpse1a79a1e.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps4b0ea48c.jpg.html"]photo_zps4b0ea48c.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps4891d4b4.jpg.html"]photo_zps4891d4b4.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps3aac6c83.jpg.html"]photo_zps3aac6c83.jpg Photo by turbolvr | Photobucket[/ame]

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zpsf93abaa4.jpg.html"]photo_zpsf93abaa4.jpg Photo by turbolvr | Photobucket[/ame]

 

[motorwood]

67k on a re-build shortblock, or original miles?

 

[TURBOLVR]

original.

 

[TURBOLVR]

HX35s $300. ea
WH1C $250.
HE351 - great shape $350.
He351 - needs rebuild for bad seal/sloppy bearing. no contact but pretty loose. $200.

[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps1bd5518f.jpg.html"]photo_zps1bd5518f.jpg Photo by turbolvr | Photobucket[/ame]

 

[TURBOLVR]

1 hx35 sold, good 351 sold. Thanks!

 

[TURBOLVR]

The short block is the complete rotating assembly BTW- block, crank, rods, pistons, cam, gears, gear case, oil cooler, ect. All was running great when pulled/parted.

 

[motorwood]

Im interested, just a matter of getting the shipping worked out.

 

[TURBOLVR]

bump

 

[TURBOLVR]

32k pump #s:
[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zps053fc8a5.jpg.html"]photo_zps053fc8a5.jpg Photo by turbolvr | Photobucket[/ame]

pics of 67k engine bores:
[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zpsa8b88b6d.jpg.html"]photo_zpsa8b88b6d.jpg Photo by turbolvr | Photobucket[/ame]
[ame="http://s815.photobucket.com/user/turbolvr/media/photo_zpsd1e30fcd.jpg.html"]photo_zpsd1e30fcd.jpg Photo by turbolvr | Photobucket[/ame]

 

[TURBOLVR]

bump, lots left!