97singlecab
New member
- Joined
- Mar 12, 2008
- Messages
- 1,051
Need to sell my 97 singlecab
The truck has a 98 motor in it with 150k on engine, Head has been o-ringed has new valves and valve seals with a custom 5 angle valve job, and is held down with 12mm ARP studs. Has 5k miles on head work.
Truck has a 12mm 215hp pump that has been benched and maxed out with 4k rpm springs. Currently has 181 delivery valves but comes with DDP comp delivery valves as well. Truck has DDP comp 76lpm injectors in it. Also has an Airdog II lift pump. The truck currently has an HE351 turbo on it with an industrial exhaust manifold and 5 inch exhaust. The transmission was gone through 1k miles ago and built with a suncoast extreme rebuild kit using red alto clutch packs. Trans has a billet input shaft, BD torque converter and an ATS valve body that will allow lock up in first gear. When I had it apart I also had every piece of the trans cryod. Truck also has custom ladder bars and sits on 20 inch rims wrapped in proxes STII tires. Truck will cut 1.6x 60' pretty easy.
Truck will also come with a spare 160hp Industrial engine complete minus injectors. Asking 12k obo I will try to get some pics up later.
__________________
The truck has a 98 motor in it with 150k on engine, Head has been o-ringed has new valves and valve seals with a custom 5 angle valve job, and is held down with 12mm ARP studs. Has 5k miles on head work.
Truck has a 12mm 215hp pump that has been benched and maxed out with 4k rpm springs. Currently has 181 delivery valves but comes with DDP comp delivery valves as well. Truck has DDP comp 76lpm injectors in it. Also has an Airdog II lift pump. The truck currently has an HE351 turbo on it with an industrial exhaust manifold and 5 inch exhaust. The transmission was gone through 1k miles ago and built with a suncoast extreme rebuild kit using red alto clutch packs. Trans has a billet input shaft, BD torque converter and an ATS valve body that will allow lock up in first gear. When I had it apart I also had every piece of the trans cryod. Truck also has custom ladder bars and sits on 20 inch rims wrapped in proxes STII tires. Truck will cut 1.6x 60' pretty easy.
Truck will also come with a spare 160hp Industrial engine complete minus injectors. Asking 12k obo I will try to get some pics up later.
__________________
