Airdog 2 4g 200gph 05-18 lift pump & spare motor

[OneBadCummins]

Airdog 2 4g 200gph lift pump for 05-18 cummins. Comes with everything but feed line(was running a fleece distribution block) low run time
$500

Have a spare 4g 200gph motor I pulled from my pulling truck when I changed setups. 4-5 passes down track.

$100

Sent from my SM-G981U using Tapatalk

 

[weazel]

PM sent

 

[OneBadCummins]

PM sent

Returned

Sent from my SM-G981U using Tapatalk

 

[Empty_Pockets]

I'll take just the motor

 

[OneBadCummins]

Sold

Sent from my SM-G981U using Tapatalk

 

[Archnemesis]

Thanks again for the deal.

Finally got a chance to hook the pump up and it definitely was needed.

The tuning I got from Lavon and the guys for my current setup with 135% overs and installed when I did their stg 3 48 conversion was murdering my lift pump pressure with the 165gph 4g installed.

Had the pump setup to run 21psi idle and would draw down to 12ish.

Now set the 200gph to same 21psi idle and drops to 18 then recovers quickly.

Pretty surprised the 200gph performs so much better that the 165.