Tcolesanti
ALL NIGHTER
- Joined
- Apr 30, 2006
- Messages
- 2,753
I hate to do this. But I have to accept the fact that the time has come for me to sell my truck. I have listed everything as best I can, though I know I'm missing a ton. I ask for serious inquiries only.
Tig welded chassis 2" DOM, stretched to 158" wheelbase
Custom 4 link 2" DOM with Barnes heim joints
Shortened FDS75 front axle (new kingpin tapered roller bearings, spindles bored to accept 1-3/4" axle)
6.20 chunk with billet pinion support and ring gear snubber
Shortened 20-145 Rockwell rear axle, Billet F106 spindles, back cover removed +machined
SCS hubs, wildwood brakes on front
PSC steering cylinder
Front setup for 4 afco shocks
Weight box ½” thick weights included
Keizer 15x19 front wheels 15x21 rear bead locks. Rim screws and caps included
Machined flanged lug nuts
Pioneer Giant Pullers
Body is near perfect, driver door has tiny rust bubble on the bottom, easy fix. Truck has been in California since 2003, never wrecked, always stored inside.
MOTOR:
ISB storm Block filled fire ringed, line bored
6 New sleeves .010 over
14mm main studs
14mm head studs
Decked
Needle roller cam bearings
Billet roller cam
block stiffener
Roller tappets
Balanced/polished 6.7 crank
Billet RR rods
Scheid aluminum sheet metal wet sump pan
External oil pump with mount and belt drive
P-pump front gear case
P-pump brackets
Rear main housing
Billet DSR fuel supply pump
Engine driven water pump for A2W
Copper head gasket
Billet front cover
Billet Tappet cover
Billet water covers
Billet oil cooler delete
Billet filter head with pre-screen
External oil cooler with Spearco Fan
Hart’s Billet air guillotine with intake horn
Good stock 12v head complete
Billet push tubes
Brand new coated bearings
Brand new fire rings
Custom tach pickup
Fluidamper (no pulley)
All Hardware
Brand new 2-280 spearco A2W ¼” thick construction
Pro Fab billet quick change drop box +3 sets of gears
Jack shaft/collars and case
Driveshaft
Kirkey aluminum seat
Brand new 6 gallon vertical aluminum fuel tank for weight box
Billet throttle/shifter/input shaft brake levers
Fabricated dash oil press/oil temp/egt/tach/switch cluster with relays and fuses
Roll pan
$35k Please call (805)390-0800 truck is located in Socal
Tig welded chassis 2" DOM, stretched to 158" wheelbase
Custom 4 link 2" DOM with Barnes heim joints
Shortened FDS75 front axle (new kingpin tapered roller bearings, spindles bored to accept 1-3/4" axle)
6.20 chunk with billet pinion support and ring gear snubber
Shortened 20-145 Rockwell rear axle, Billet F106 spindles, back cover removed +machined
SCS hubs, wildwood brakes on front
PSC steering cylinder
Front setup for 4 afco shocks
Weight box ½” thick weights included
Keizer 15x19 front wheels 15x21 rear bead locks. Rim screws and caps included
Machined flanged lug nuts
Pioneer Giant Pullers
Body is near perfect, driver door has tiny rust bubble on the bottom, easy fix. Truck has been in California since 2003, never wrecked, always stored inside.
MOTOR:
ISB storm Block filled fire ringed, line bored
6 New sleeves .010 over
14mm main studs
14mm head studs
Decked
Needle roller cam bearings
Billet roller cam
block stiffener
Roller tappets
Balanced/polished 6.7 crank
Billet RR rods
Scheid aluminum sheet metal wet sump pan
External oil pump with mount and belt drive
P-pump front gear case
P-pump brackets
Rear main housing
Billet DSR fuel supply pump
Engine driven water pump for A2W
Copper head gasket
Billet front cover
Billet Tappet cover
Billet water covers
Billet oil cooler delete
Billet filter head with pre-screen
External oil cooler with Spearco Fan
Hart’s Billet air guillotine with intake horn
Good stock 12v head complete
Billet push tubes
Brand new coated bearings
Brand new fire rings
Custom tach pickup
Fluidamper (no pulley)
All Hardware
Brand new 2-280 spearco A2W ¼” thick construction
Pro Fab billet quick change drop box +3 sets of gears
Jack shaft/collars and case
Driveshaft
Kirkey aluminum seat
Brand new 6 gallon vertical aluminum fuel tank for weight box
Billet throttle/shifter/input shaft brake levers
Fabricated dash oil press/oil temp/egt/tach/switch cluster with relays and fuses
Roll pan
$35k Please call (805)390-0800 truck is located in Socal
Attachments
Last edited: