BD r1000 Chargers

[01Zip24v]

Is anyone running them at all? I am just curious what people are seeing for boost, horsepower and torque numbers?

 

[3brorce]

There is a reason they are called R1000s. Hence the 1000. They are 64.5/82.2. Just run a 64/480.

 

[HeTheAethyr!]

believe there still t3 and t4?

 

[Hurley]

believe there still t3 and t4?

IIRC the only T3/T4 set from BD is the towing twins (357 over 366)

 

[TTR 21]

Ive ran their 75mm and 80mm Trackmaster turbos. 52 psi boost, 49 psi drive with both. 11.27 @119 fuel only with 75mm. 737hp fuel only at 40 psi boost.

 

[BigJoeDiesel74]

Trackmaster R1000 single or twins? Either way I would advise you to not go that route.

 

[TTR 21]

Trackmaster R1000 single or twins? Either way I would advise you to not go that route.

I ran them as singles and am running the 80 right now. Love it!

 

[addicted2power]

I ran the r850s. @73psi I made 950hp 1802 tq running a 64/480 now making just over a 1000

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[Hector-BD]

The track masters and R1000 really depend on how you want to set it up. as listed in the chart below

HP Range CFM Turbo Model Compressor Wheel Turbine Wheel A/R Flange
500-575 1070 R575 66.0 mm 2.60 in 80.0 mm 3.15 in 0.91 T4
575-650 1190 R650 67.5 mm 2.66 in 83.4 mm 3.28 in 0.90-1.25 T4
650-675 1378 R700 71.0 mm 2.80 in 83.4 mm 3.28 in 0.90-1.25 T4
675-700 1552 R800 74.6 mm 2.94 in 83.4 mm 3.28 in 0.90-1.25 T4
700-850 1552 R850 74.6 mm 2.94 in 87.3 mm 3.44 in 0.90-1.25 T4
850-950 1680 R950 80.3 mm 3.15 in 87.3 mm 3.44 in 0.90-1.25 T4
950-1100 1778 R1000 82.2 mm 3.24 in 87.3 mm 3.44 in 0.90-1.25 T4
1200-1300 1988 R1100 88.0 mm 3.46 in 109.7 mm 4.32 in 1.15-1.45 T6
1200-1300 2128 R1200 90.0 mm 3.54 in 109.7 mm 4.32 in 0.85-1.60 T6