06 DIESEL
Dead Eye Firearms LLC
Took off the flex pipe portion, cut off the pipe at the elbow and welded a cap on the elbow and bolted it back on. This may not make sense without seeing the piece in person. I do not have any pictures of it handy but I found one online.
THe end with three holes is the end that goes against the turbo piping. Cut it at that end where it goes from thick elbow to pipe. Tig weld on a stainless cap, the factory part is stainless, FYI. Once the cap is welded on just bolt it back on.
Be careful when taking the existing bolts out, they are M8 or something stupid small and want to break easily, I broke two heads off when I did mine, no fun, lube is your friend, early and often.
THe end with three holes is the end that goes against the turbo piping. Cut it at that end where it goes from thick elbow to pipe. Tig weld on a stainless cap, the factory part is stainless, FYI. Once the cap is welded on just bolt it back on.
Be careful when taking the existing bolts out, they are M8 or something stupid small and want to break easily, I broke two heads off when I did mine, no fun, lube is your friend, early and often.