little6cylinder
Everything is "fixable"
- Joined
- Mar 7, 2011
- Messages
- 1,218
I'm not sure if anyone really cares but I was having a tough time finding cage pictures before I built mine so here's a few of how I did it.
I even put her to work! Haha Needed a little help bending the tubing.
First I cut the holes in the floor. Then I bent the main hoop, set the hoop on jack stands. Measured and cut the rear down bars tacked them in place. Measured and cut the door bars. Let it down as far as I could and finish welded it. The rear bars come down straight on the frame rails so I welded them first. Then I made out riggers and welded them on. Center bars first and door bars last.
I even put her to work! Haha Needed a little help bending the tubing.
First I cut the holes in the floor. Then I bent the main hoop, set the hoop on jack stands. Measured and cut the rear down bars tacked them in place. Measured and cut the door bars. Let it down as far as I could and finish welded it. The rear bars come down straight on the frame rails so I welded them first. Then I made out riggers and welded them on. Center bars first and door bars last.