RonA
Active member
- Joined
- Feb 26, 2008
- Messages
- 11,068
Good morning Greg. I had to put my extra cam in my truck and now i don't have a cam for the new 6.7. Figured I'd ask early while i am waiting on the head. It will be for a p-pumped 6.7 daily driver. Not planning on getting crazy with it. Pistons are still in the box, could be cut if needed. I'm going to run the 13mm pump and injectors I am running now along with the GT4094/GT4718 twins. Can't imagine it ever seeing over 3500rpm.It is spooling fine now with a Hamilton 181/210, should spool better with the longer stroke of the 6.7 so I'm not worried about sacrificing top end for spoolup. I am going to have cam bearings installed if that matters. It will need to be set up for a bolt on gear. Let me know what you can do, and a time frame.
RonA
RonA