Cam sensor, IPR (and other stuff)

Intake gaskets are reusable......
DO the STC, stand pipes and dummy plugs.
IPR is probably fine unless that is a hole in the screen.
If you pull valve covers, CAREFULLY look at the tops of injectors and MAKE DAMN sure the top O-rings are in good shape. If not, rebuild your Hpop rails. As the injector feeds start to get loose in the rails they squirt high pressure oil at the tops of the injectors and take out the o-ring up there.
Turbo install kit.
 
Last edited:
I got the truck running a few weeks ago. So far so good. The truck is running really well. Whatever the issue was it has been weak for a while.

The main thing I did was the IPR valve and STC fitting. The STC fitting was the old style. I honestly can not believe that because I purchased the truck with 140,000 miles and have done nothing but drive it. Its hard to fathom I have put 170,000 miles on that old fitting. :ford:

Edit: I also did an EGR delete i have had sitting in the closet for years. It was given to me and I cant remember who gave it to me. If it were anyone on here, well, thank you again. :Cheer:
 
Last edited:
Back
Top