Cat s300g

[SuperiorRam]

So I have a cat s300g that needs a exhaust wheel
measures 57/65/.80
wastegated housing
cat outlet
t3 foot

http://i160.photobucket.com/albums/t181/erranua/2690185d.jpg


http://i160.photobucket.com/albums/t181/erranua/73719d44.jpg

http://i160.photobucket.com/albums/t181/erranua/85a907f6.jpg

235 shipped
To continental 48

 

[SuperiorRam]

Bump

 

[SuperiorRam]

Bump

 

[SuperiorRam]

Same charger as a bd super b except outlets

 

[798 JMan]

And what kind of cat did this come off of? I work around alot of heavy equipment and this would be good to know.

 

[DieselWrencher]

Does the exhaust housing have any cracks in it? Any around the WG where the puck seals at the hole?

 

[Street sleeper]

Eric educate me. Would this bolt on my stock 24v?

 

[mhuggler]

And what kind of cat did this come off of? I work around alot of heavy equipment and this would be good to know.

230hp or less C7(3126) or 3116.

 

[SuperiorRam]

Does the exhaust housing have any cracks in it? Any around the WG where the puck seals at the hole?

Not that I noticed I'll check again after work

Eric educate me. Would this bolt on my stock 24v?

You'd have to rework your exhaust, and compressor outlet would need a rubber outlet
I know this sized charger was a decent upgrade for the cr

 

[TURBOLVR]

I know this sized charger was a decent upgrade for the cr

nice mild upgrade for 89-04 yes, 04.5+ no, IMO.

What happened to the exhaust wheel?

 

[SuperiorRam]

I had a 06 he351 on my cr it held the same boost but cooled better $0.02
something went through the engine and the exhaust wheel bit it too... No housing damage

 

[SuperiorRam]

Bump

 

[biggy238]

S200.....
Post up the serial number