Cheapest place to buy exhaust clamp??

[ThundersTruck]

Have a BW .90 t4 housing with the 74/83 wheel, I heard it was the same as a gt42? Just looking for the v-band clamp and adapter flange to finish up my down pipe.

 

[Big Blue24]

The exhaust outlet v-band flange is the same standard 5", but the exhaust turbine housing itself is definitely not the same. It could probably be machined to fit, but you cannot interchange the housings stock for stock.

I tried with my GT4294. It came with a 1.28 wastegated T-6 housing, I tried to install a 1.10 T-6 S400 housing and the exhaust wheel of the GT4294 bottoms out in the S400 housing before the center section is seated to the turbine housing.

 

[Scooter's Roofing]

himni-racing.com has the flange and clamp

 

[roachie]

Racepartssolutions.com and any local dynaflex dealer will have them.

 

[ThundersTruck]

himni-racing.com has the flange and clamp

Which one is it the 4'' BW or gt42

 

[ThundersTruck]

Racepartssolutions.com and any local dynaflex dealer will have them.

Would u happen have the dynaflex part number, been having a problem matching it up

 

[roachie]

hang on

 

[roachie]

I cant get their online catalog to work. I wanna say it was XX-148 ?

 

[Scooter's Roofing]

Which one is it the 4'' BW or gt42

if you're using a BW housing, I would order the one for the BW

 

[1stgencummins17]

x2 on racepartsolutions.com