Bosshawg600
PDP.com FireFighter
- Joined
- Aug 3, 2006
- Messages
- 3,651
First off, yes, I do have the entire truck for sale. So if it is prohibited in doing this, Mods, you can delete.
But I have had a few people ask, so I am post up the Engine/Trans/Tcase out of my truck for sale.....
Engine: 2003 CR
Engine:
Full Rebuild 4/2016 4000 miles on everything!
.20 Over Re-bore, Balanced Bottom End, New Valve Job and Valve Guides, Sleeved and Decked Block
Keating Machine Fire Rings
Hamilton 181/214 Cam
Hamilton Extreme Duty Push Rods
Crower Valve Springs
ATS 3 pc 2nd Gen Manifold
S366/S480 Twin Turbos (Rebuilt 3/16)
PPE Dual CP3's (LBZ top, High Flow 6.7L pump bottom)
200% Over Injectors (New 12/15, 4000 miles on them)
Banks Intake w/ Boost tubes and BANKS Intercooler
Twin Turbo's:
S366/73/.91 t4 over S480/96/1.32 t6 (Rebuilt 4/16)
V Band Connectors between turbos so no Blown boots!
ATS 3pc. Manifold
AirDog 150 with new motor
Full 5 in exhaust with 7" stack or 5" tail pipe
Trans:
Monster Pump Mike Billet 47re with 48RE guts Rebuilt 4/15
Billet Input and Output
2pc Monster Pump Mike Converter
TCI Outlaw Shifter
Tcase: 241DHD
Really wanting to sell as a complete package, and if bought as a whole package, buyer can have anything the need for a repower, engine swap i.e. computer, harnesses, piping, intercooler, programmer, accesories.....whatever you want!
It is in a complete running truck and fresh out of the machine shop! Have all the paper work for engine, injectors, turbos, lower pump and accesories I collected during the rebuild.
Going to start at $20,000 for a complete, drop-in 900hp drivetrain
But I have had a few people ask, so I am post up the Engine/Trans/Tcase out of my truck for sale.....
Engine: 2003 CR
Engine:
Full Rebuild 4/2016 4000 miles on everything!
.20 Over Re-bore, Balanced Bottom End, New Valve Job and Valve Guides, Sleeved and Decked Block
Keating Machine Fire Rings
Hamilton 181/214 Cam
Hamilton Extreme Duty Push Rods
Crower Valve Springs
ATS 3 pc 2nd Gen Manifold
S366/S480 Twin Turbos (Rebuilt 3/16)
PPE Dual CP3's (LBZ top, High Flow 6.7L pump bottom)
200% Over Injectors (New 12/15, 4000 miles on them)
Banks Intake w/ Boost tubes and BANKS Intercooler
Twin Turbo's:
S366/73/.91 t4 over S480/96/1.32 t6 (Rebuilt 4/16)
V Band Connectors between turbos so no Blown boots!
ATS 3pc. Manifold
AirDog 150 with new motor
Full 5 in exhaust with 7" stack or 5" tail pipe
Trans:
Monster Pump Mike Billet 47re with 48RE guts Rebuilt 4/15
Billet Input and Output
2pc Monster Pump Mike Converter
TCI Outlaw Shifter
Tcase: 241DHD
Really wanting to sell as a complete package, and if bought as a whole package, buyer can have anything the need for a repower, engine swap i.e. computer, harnesses, piping, intercooler, programmer, accesories.....whatever you want!
It is in a complete running truck and fresh out of the machine shop! Have all the paper work for engine, injectors, turbos, lower pump and accesories I collected during the rebuild.
Going to start at $20,000 for a complete, drop-in 900hp drivetrain