CR pulling parts and stock take offs,cheap!

Inducer is 2.5. It has a t4 flange. I ran it on a 3rd gen with a 2nd gen manifold.
 
I need the intercooler rubber connecting tubes only, No metal pipes. How much. Please call 570 840 0069
Thank You
 
Price Reduction!!!!!!!

-factory 03-07 5.9 damper-$75

-New 2025 dr performance module for '04.5 to '07 dodge 5.9-$450

-Stock 3rd exhaust manifold-$75

-3rd gen inter cooler piping with boots and clamps-$75

-2nd gen polished and painted intake horn(used on 3rd gen)-$100

-Hx 35 turbo off of 2nd gen- 150,000mi- $200

-BD diesel steel inter cooler pipe w/1/4'' pipe bungs welded on the bottom side for water injection, painted-$125

-3rd gen stock intake horn-$30

-S-465 turbo, 1.0 ar ex housing-$1100

-Stock 3rd gen inter cooler-$150

-New dodge quad cab floor mats-$ 75

-Factory stone guards off of bottom of doors-$20

-Used 409 Stanless 2nd gen down pipe with factory elbow-$150

-Pictures of everything just shoot me a pm, all of the painted parts were painted at a professional body shop with base coat clear coat paint.
 
Price reduction.....intercooler pipes are the same price
 
-factory 03-07 5.9 damper-$75

-New 2025 dr performance module for '04.5 to '07 dodge 5.9-$450

-Stock 3rd exhaust manifold-$75

-2nd gen polished and painted intake horn(used on 3rd gen)-$100

-Hx 35 turbo off of 2nd gen- 150,000mi- $200

-BD diesel steel inter cooler pipe w/1/4'' pipe bungs welded on the bottom side for water injection, painted-$125

-3rd gen stock intake horn-$20

-S-465 turbo, 1.0 ar ex housing-$1100

-Stock 3rd gen inter cooler-$150

-New dodge quad cab floor mats-$ 75

-Factory stone guards off of bottom of doors-$20

-Used 409 Stanless 2nd gen down pipe with factory elbow-$150

-Pictures of everything just shoot me a pm, all of the painted parts were painted at a professional body shop with base coat clear coat paint.
 
New parts added

-Polished grid heater delete from glacier diesel-$40

-factory 03-07 5.9 damper-$75

-48re brain and complete wiring harness with cable(05-07)-$100

-Stock 3rd gen pushrods-$30

-Stock 3rd exhaust manifold-$75

-3rd gen steel intercooler pipe-$40

-2nd gen polished and painted intake horn(used on 3rd gen)-$100

-BD diesel steel inter cooler pipe w/1/4'' pipe bungs welded on the bottom side for water injection, painted-$100

-3rd gen stock intake horn-$30

-S-465 turbo, 1.0 ar ex housing-$1100

-Stock 3rd gen inter cooler-$100

-New dodge quad cab floor mats-$ 75

-Factory stone guards off of bottom of doors-$20

-Used 409 Stanless 2nd gen down pipe with factory elbow-$150

-Pictures of everything just shoot me a pm, all of the painted parts were painted at a professional body shop with base coat clear coat paint.
 
-Polished Grid heater delete-$50

-New 6.7 cast elbow bf down pipe- $50

-factory 03-07 5.9 damper-$50

-used 2025 dr performance module for '04.5 to '07 dodge 5.9-$300

-Stock 3rd exhaust manifold-$75

-2nd gen polished and painted intake horn(used on 3rd gen)-$100

-BD diesel steel inter cooler pipe $25

-3rd gen stock intake horn-$30

-S-465 turbo, 1.0 ar ex housing-$1000!!!!!!!!!!!

-New dodge quad cab floor mats-$ 75

-Used 409 Stanless 2nd gen down pipe with factory elbow-$150

-Pictures of everything just shoot me a pm, all of the painted parts were painted at a professional body shop with base coat clear coat paint.
 
You must log in or register to reply here.
Back
Top