We have the issue pinpointed, CRT is just working on the modifications to correct it.
Lavon
We have the issue pinpointed, CRT is just working on the modifications to correct it.
Lavon
this weekend, I will have one new and updated VB built, it needs to be tested, hopefully one day next week we cant test. A new CNC program must be made and the billet lower half must be changed for this latest update. I am 99% sure I got this, but it must be tested.
John Cope
this weekend, I will have one new and updated VB built, it needs to be tested, hopefully one day next week we cant test. A new CNC program must be made and the billet lower half must be changed for this latest update. I am 99% sure I got this, but it must be tested.
John Cope
Ok today I built a pro type of my valve body with the new lock up hydraulic circuit. Monday I will send it to Fire Punk for testing on the answer Matic and if is all good then testing in a truck they have at the shop.
If anyone that wants a billet brake or a billet reverse manual valve body with NO lock up for a 500 516 618 48RE . I have them on sale for $200.00 off or a free billet servo kit a free 4.2 lever a free HD band strut. With a purchase of either non lock up valve bodies
I built a valve body with the latest updated lock up and sent it to FirePunk, it worked on the answer-matic ( valve body tester ) with the pressures at 200 psi but had a small issue over 200 psi not turning lock up off, I think a strong spring on the lock up valve and we are there. I think also the valve may have stuck just once going a false reading.
I made the auto-cad & cnc program changes to the billet half, I have to make a undated separator plate with a added passage and a new small separator plate and passage plate for the lock up valve, this will be all done and ready by the 1st week in April.
The guys at firepunk must be very busy, text messages have been short & to the point. the valve body now needs to be installed into a truck for a real world test drive.
That's good news! Thank you for the update sir. Looking forward to hear what real world results bring.
I have a feeling Lavon is pretty busy. I sent him a pm on piston bowl style and tuning recommendation for my 6.4 build, hoping to give him my $$$$... But no response. I'd imagine they are pretty swamped right now.
Considering some employees are sleeping at the shop and most are working around the clock... I'd say they're a little busy. Have you tried posting on the FP facebook group?I have a feeling Lavon is pretty busy. I sent him a pm on piston bowl style and tuning recommendation for my 6.4 build, hoping to give him my $$$$... But no response. I'd imagine they are pretty swamped right now.
Considering some employees are sleeping at the shop and most are working around the clock... I'd say they're a little busy. Have you tried posting on the FP facebook group?