UNBROKEN
Ezekiel 25:17
- Joined
- Apr 21, 2006
- Messages
- 17,158
Bought a new set of Super Duty sail panels with the factory tweeters, which were gutted out.
These are going in.
Cut the front 1/2" off the Focal dash mount pods and shaped it to fit the Ford part.
Hacked a 2" hole outta the Ford parts.
Plastic welded to 2 parts together.
A little bondo and sanding.
Spot putty in the pinholes, more sanding and a 2nd coat of primer left me with this.
Tomorrow's plan is a final wet sanding with 320 grit paper followed by black paint.
EDIT....just wet sanded them. They're glass smooth with no pin holes anywhere. Hopefully the paint will lay down right in the morning.
These are going in.
Cut the front 1/2" off the Focal dash mount pods and shaped it to fit the Ford part.
Hacked a 2" hole outta the Ford parts.
Plastic welded to 2 parts together.
A little bondo and sanding.
Spot putty in the pinholes, more sanding and a 2nd coat of primer left me with this.
Tomorrow's plan is a final wet sanding with 320 grit paper followed by black paint.
EDIT....just wet sanded them. They're glass smooth with no pin holes anywhere. Hopefully the paint will lay down right in the morning.