EDP Comp D Sponsor Joined Jul 17, 2007 Messages 511 Oct 6, 2008 #1 Check out the link http://www.competitiondiesel.com/forums/showthread.php?p=476326#post476326
H HPAddict New member Joined May 14, 2007 Messages 216 Oct 6, 2008 #2 got better pix?? my cheezy homebrew..... the plate is off set on the side panels to split the gap between the holes of the shank. if one is too much, turn it over.....
got better pix?? my cheezy homebrew..... the plate is off set on the side panels to split the gap between the holes of the shank. if one is too much, turn it over.....
jktcummins 24v GOD!!!! HAHAHA Joined Apr 1, 2007 Messages 2,450 Oct 6, 2008 #3 What diameter does the eye need to bee??????
Muddin_dude06 ... Joined Sep 10, 2007 Messages 2,541 Oct 6, 2008 #4 If its a circle I think 3.5" but you can also do an oblong hole that is 3"x3.5" IIRC
White Duramax New member Joined Oct 21, 2007 Messages 452 Oct 6, 2008 #6 Hole sized needs to be 3 3/4" long for an NTPA hook to fit that is on most sleds now.
EDP Comp D Sponsor Joined Jul 17, 2007 Messages 511 Oct 6, 2008 #7 these eyes are machined out to 3.5" in length