Excess Inventory Sale..... T6 S400 1.10A/R housings...300+ in stock

D

DRTurbo

Turbocharger Engineer
Joined
Sep 9, 2010
Messages
867
T6 1.10A/R turbine housings for S400's.

They are cut for 83mm turbine wheel, 87mm turbine wheel and the new 92mm turbine wheel. Housings are $50 for the housings for the 83mm TW and $75 for the housings that fit the 87mm and 92mm TW. Prices does not include shipping.

We have 300+ in stock...... :Cheer:
 
For those that have called and ordered. We do have them for the other 87mm turbine wheel and also for the 85mm turbine wheel. :)
 
We are now out of the 85mm turbine wheel housings, but can make more if needed.

Still in stock are the 83, 87, 92mm turbine housings.
 
More 87mm housings cut ;)
 

Attachments

  • smallpile.jpg
    smallpile.jpg
    110.2 KB · Views: 0
I have a S471 with the following description on the exhaust side..

Turbine Wheel Inducer/Exducer 96mm x 87mm

Is that a 87mm and it has a 1.32 on it now will your 1.10 work?

Entire description

Borg Warner S400w/71mm compressor wheel with Extended Tip Technology, 1.32 A/R exhaust

Turbo Specs:
Compressor Wheel Inducer/Exducer 71mm x 100mm
Turbine Wheel Inducer/Exducer 96mm x 87mm
Turbine Outlet 5 Inch V-Band
Turbine Inlet T6 Divided
Turbine A/R - 1.32

I want to raise the output of my S471 a little bit will this help?
 
Last edited:
SNOOT said:
I have a S471 with the following description on the exhaust side..

Turbine Wheel Inducer/Exducer 96mm x 87mm

Is that a 87mm and it has a 1.32 on it now will your 1.10 work?

Entire description

Borg Warner S400w/71mm compressor wheel with Extended Tip Technology, 1.32 A/R exhaust

Turbo Specs:
Compressor Wheel Inducer/Exducer 71mm x 100mm
Turbine Wheel Inducer/Exducer 96mm x 87mm
Turbine Outlet 5 Inch V-Band
Turbine Inlet T6 Divided
Turbine A/R - 1.32

I want to raise the output of my S471 a little bit will this help?
Click to expand...

No the 87mm is an 87/80 and 87/78 for the quick spooling version.
 
Another batch of 100 extra is here. Let us know if we missed your order by accident. We have sold over 80 of them and only 2 guys we missed their order on. So let us know if we overlooked you.

Thanks
 
No...we only make them for up to the new 92mm turbine. The 96mm units use different CHRA pilot hole size.
 
I will have to look at the S480 I bought...
I'll pull it apart and measure up the turbine wheel for you.

May get you to add one of these to the exsisting order I have with you.:Cheer:
 
Well damn...the turbine inducer tips are measureing 95.7**mm by 88.000mm

Have anything along those lines smaller then a 1.32 in a T-6?
 
For those asking....they are still plenty of these in stock. PM's replied.
 
You must log in or register to reply here.
Back
Top