Cummin_un_glued
New member
- Joined
- Sep 17, 2007
- Messages
- 785
Just finished this up this week. Thought i'd post it in here since i didnt find very much on this axle on here.
Tag
Front
Back. F106 chunk
Stripped
First cut
Second cut. 15" was removed to allow for using 2 short side shafts
Welded back together
Mockup of reassembly
Finished width wms-wms is 70"
Tag
Front
Back. F106 chunk
Stripped
First cut
Second cut. 15" was removed to allow for using 2 short side shafts
Welded back together
Mockup of reassembly
Finished width wms-wms is 70"