Fleece XDL Data Logger

[bcdeutsch731]

The Fleece Performance XDL was designed to be an expansion data logger that seamlessly integrates with EFILive via the V2 module. With the unmatched ability to log all 21 XDL channels and 96 OBDII channels and display them using EFILive’s superior user interface, the XDL is the most versatile and cost effective data logger on the market. The XDL is not limited to OBD II type or EFILive supported vehicles though.

I used this in my race truck for a couple seasons. Over the winter I sent logger back to Fleece so they could make sure everything works like it should. Fleece supplied me with a new wiring harness because the old one burnt up in the fire. Everything else checked out good.

This will come with everything in the pictures. GPS for ground speed. Six pressure sensors. One temp sensor. More temp sensors can be ordered from Fleece or Amazon for like $50.
Asking $1500

 

[bcdeutsch731]

Here are the pics

 

[Chris Tobin]

Fleece supplied me with a new wiring harness because the old one burnt up in the fire.

What fire Brett???

 

[bcdeutsch731]

I can't believe you didn't hear that my truck caught fire in October at a local race. Just before I got to the finish line my motor went up in flames. The flames got the firewall so hot it started my carpet and all the wiring under the dash on fire.
I tore the whole truck apart and I'm starting over for the most part. The truck is at HSP getting the new 25.6 cage and some other goodies. Hoping to have it back out sometime in September.

 

[Chris Tobin]

I can't believe you didn't hear that my truck caught fire in October at a local race. Just before I got to the finish line my motor went up in flames. The flames got the firewall so hot it started my carpet and all the wiring under the dash on fire.
I tore the whole truck apart and I'm starting over for the most part. The truck is at HSP getting the new 25.6 cage and some other goodies. Hoping to have it back out sometime in September.

Wow!!! No I hadn't heard, but I don't do facebook or stuff like that...

Glad you are okay and that the damage wasn't too severe!!! I look forward to seeing the next revision!!! HSP does awesome work for sure!!!

 

[bcdeutsch731]

Bump $1450 shipped

 

[bcdeutsch731]

bump $1400 shipped

 

[Pudge]

Because I'm a bit technology stupid, will this work on something with no ecm, like a mechanical truck? That is as long as you have a V2 to hook into the XDL, you can use it on anything else? Free bump for a whole lot of data

Sent from my SM-G930R4 using Tapatalk

 

[bcdeutsch731]

It should work as long as you have a V2. You would only be able to record the 21 XDL channels and nothing on the obd side.

The best person to ask would be Jeff at Fleece. Here is his email.
jeff@fleeceperformance.com

 

[bcdeutsch731]

bump $1350 shipped

 

[Ryan Tucker]

What bell are you running on the 400? Big 13 inch lockup?

 

[bcdeutsch731]

What bell are you running on the 400? Big 13 inch lockup?

Browell big bell with an extra 1" added to the depth of it to fit the 12" Neal Chance lock up

 

[Ryan Tucker]

Browell big bell with an extra 1" added to the depth of it to fit the 12" Neal Chance lock up

Great setup, and thanks. Good luck to you getting her back together, hated to hear about the fire

Ryan

 

[bcdeutsch731]

need gone! $1250 shipped

 

[bcdeutsch731]

bump $1200 shipped