Flux 4.7 injectors

[schnutsy]

I have a set of flux 4.7 injectors on stock bodies.
Stock bodies, nozzles are 235hp. Going bigger, so I won't have any use for these. Looking to get $2000 for all 6, no cores needed. Could possibly seperate nozzles if I can find a buyer for the bodies. Thanks

 

[schnutsy]

OBO

Bump...

 

[crpower]

Early or late cr?

 

[B.A.Ram]

So......you're in flux.....?

 

[schnutsy]

Late cr.

 

[mkoontz1]

Still available?

 

[schnutsy]

Yes they are, bump...

 

[schnutsy]

Make offers. Bump

 

[SledJunkie]

Would be interested in nozzles, already have good bodies


04.5 QCSB CR, ATS dual CP3's, ATS Trans, Bosch Motorsports 125hp nozzles, Spearco intercooler, A1 H11 headstuds, Custom Traction bars, Super B Special turbo, Fass 150gph, Smarty TNTR tuning.

 

[schnutsy]

Make offer on just nozzles, willing to work on prices and separating them at this point.

 

[cummin95]

how many miles on these and what injection system you running? such as lift pump and cp3s?

 

[SledJunkie]

Will they fit both old style bodies and stainless bodies?


04.5 QCSB CR, ATS dual CP3's, ATS Trans, Bosch Motorsports 125hp nozzles, Spearco intercooler, A1 H11 headstuds, Custom Traction bars, HTT clipped S475, Fass 150gph, Smarty TNTR tuning.

 

[Larson24]

possibly interested in the bodies. how many miles? recently tested?

 

[schnutsy]

how many miles on these and what injection system you running? such as lift pump and cp3s?

About 15k on the nozzles, fass 150 and dual II cp3 setup.

 

[schnutsy]

Will they fit both old style bodies and stainless bodies?


04.5 QCSB CR, ATS dual CP3's, ATS Trans, Bosch Motorsports 125hp nozzles, Spearco intercooler, A1 H11 headstuds, Custom Traction bars, HTT clipped S475, Fass 150gph, Smarty TNTR tuning.

Unsure, they are currently on stock bodies. I will look into it for you.

 

[schnutsy]

possibly interested in the bodies. how many miles? recently tested?

66k on stock bodies, not tested but can check balance rates with efi.

 

[schnutsy]

Will they fit both old style bodies and stainless bodies?


04.5 QCSB CR, ATS dual CP3's, ATS Trans, Bosch Motorsports 125hp nozzles, Spearco intercooler, A1 H11 headstuds, Custom Traction bars, HTT clipped S475, Fass 150gph, Smarty TNTR tuning.

Will work on both body styles. Haven't checked balance rates but if someone is interested I can do that for them. Bump

 

[SledJunkie]

Have you thought of a price yet for just nozzles?


04.5 QCSB CR, ATS dual CP3's, ATS Trans, Bosch Motorsports 125hp nozzles, Spearco intercooler, A1 H11 headstuds, Custom Traction bars, HTT clipped S475, Fass 150gph, Smarty TNTR tuning.

 

[schnutsy]

I'd take $600 for the nozzles