For Sale: 1993 dodge pulling truck

nborga87

nborga87

Poor Boy Puller
Joined
Nov 1, 2009
Messages
788
I ve decided to try to sell my pulling truck. here are some specs on it:

truck:
1993 dodge w250 regular cab long bed (truck in my avatar)

engine:
12v
mahle marine pistons, flycut
rotating assembly balanced
ati super damper
block line bored for cam bushings
bored .020 over had a deck plate on it when bored
a1 head studs
14mm head studs. heavy duty rod bolts
block cut for fire rings
port and polished head. i have flow sheets for it
comp cams nascar valve springs, pockets were cut out to fit these
titanium keepers and retainers
hd pushrods
hamilton cam
ported stainless t4 manifold
13mm pump by dpe pump capable of 900 cc
5x20 injectors
electric water pump
.120 fuel lines
dual feed
electric fans
air to water intercooler
s480 set up for 2.8 now could go 2.6 easily
Chassis:
truck hooks very good
custom built traction bars, hitch, sled stops and bumpstops in rear
dana 80 rear with 4.88, welded diff, girdle, yukon axles, 1480 billet yoke
dana 60 front 4.88 yukon spool, 1410 ujoints
nv4500 trans and 241 dhd t case
front traction bars
truck weighs about 6000 lb. so 2000 lbs or more is hung on front. will sell weight with truck. i have all 100lb ih suitcase weighs and a custom weight bracket

misc.
auto meter gauges
single racing seat
rci fuel cell
air dog 2 165 adjustable. fuel psi gauge
stroud clutch blanket
fuel and air shutoff
reverse and neutral lights
fire ext. mounted in cab
33x12.50 16 sts on eagle eight hole rims. tires are like brand new, i have spacers and wheel and tire to run duals

here are a couple photos:
Zenfolio | Eastern Extreme Pulling.com | JULY 20, 2012 EASTON, MD

Zenfolio | Eastern Extreme Pulling.com | JULY 20, 2012 EASTON, MD

Zenfolio | Eastern Extreme Pulling.com | 2012 KEYSTONE NATIONALS SESSION 3


i know I'm probably forgetting info on this thing so if you have any questions at all call me at 410-310-9757. My names nick. or pm
i would like to get 20,000 obo for it. i also have a 2000 ford 7.3 dually and gooseneck trailer i would let go too if the truck sells. Im up for trades too, as i would like to get into something else so let me know what you have

thanks
nick
 
ha i had someone you might know help me out with those springs ( btw they ve worked out great)
 
Very strong hookin' truck! And a good guy too! Good luck with the sale nick even tho it sucks seeing you sell it. What you gettin into now??
 
I am wanting to buy a house and the money would really help.
 
what are the specs on the cam?
what clutch are you running?

any idea on where its at power wise?

any vids?
 
the cam is a 232/252 hamilton, clutch is a 3850 sintered iron dd by valair, not many since it was freshened up

[ame="http://www.youtube.com/watch?v=4reI3RDlteM&feature=autoplay&list=ULNSNdy1wvDzE&playnext=1"]Nick Interstate Pull 3rd Place - YouTube[/ame]
[ame="http://www.youtube.com/watch?v=nDK87ThvU8M"]Nicks truck pull at Tuckahoe 7/20/2012 - YouTube[/ame]
[ame="http://www.youtube.com/watch?v=WIRLB5MB5SA&feature=related"]Tuckahoe Sled Pull May 26 2012 Team - YouTube[/ame]

as for power I'm not sure its never been dynoed. I ve been happy with the power its making. last winter i had some work done to the head, put a 13mm pump on it and the s480 and the truck has run awesome.
 
I have had a boner for this truck forever. Wish i could call it my own glws!
 
Damn brother would love to add that to my stable....... good luck to you on the sale

Sent from my DROIDX using Tapatalk 2
 
any interest in a duramax trade? ive seen this run by far my favorite truck!!
 
Last edited:
BEAUTIFUL TRUCK! One of my favorite 1st Gen's to :drool1: over!

Hate to see you sell it, but good luck with the sale!
 
You must log in or register to reply here.
Back
Top